Pi Speakers Forum
[
Pi Speakers
] [
Audio Round Table
] [
Posting Rules
] [
Help
]
Search:
tube active xover update
- Sam P.
13:27:26 03/01/03
(6)
Re: tube active xover update
-
Wayne Parham
13:46:10 03/01/03
(5)
do "bottle heads" use 3 wire power cords?
- Sam P.
14:21:30 03/01/03
(4)
Ground loops
-
Wayne Parham
19:40:52 03/01/03
(3)
TEMPORARILY lifted the green wire from chassis
- Sam P.
21:08:06 03/01/03
(2)
You found it!
-
Wayne Parham
22:04:30 03/01/03
(1)
heater-cathode hum?
- Sam P.
17:21:19 03/02/03
(0)
JBL Tent amps: lots of watts for $$$
-
Till E.
08:35:30 03/01/03
(6)
Re: JBL Tent amps: lots of watts for $$$
-
Chris R
08:41:02 03/01/03
(5)
220V outlets
- Luxmanlover
10:07:26 03/01/03
(4)
does being made for 50Hz. power matter?
- Sam P.
10:45:46 03/01/03
(3)
50-60Hz power
-
Wayne Parham
13:50:50 03/01/03
(2)
JBL power amps
- Formica
21:42:59 03/23/03
(1)
Re: JBL power amps
-
Wayne Parham
23:29:22 03/23/03
(0)
Re: Pi Speakers
-
Moutzu
07:09:57 03/01/03
(1)
Re: Pi Speakers
-
mollecon
09:25:23 03/01/03
(0)
Diaphram size of compression drivers, does it affect performance?
- Adrian Mack
04:05:42 03/01/03
(1)
"Size matters"
-
Wayne Parham
13:52:26 03/01/03
(0)
One Pi/Two Pi driver level adjustment?
- Brian Goodman
10:18:56 02/28/03
(1)
Driver levels
-
Wayne Parham
11:52:18 02/28/03
(0)
One Pi as home studio monitor
- Brian Goodman
18:49:06 02/27/03
(2)
You've got mail!
-
Wayne Parham
23:00:54 02/27/03
(1)
Thanks! (nt)
- Brian Goodman
07:18:36 02/28/03
(0)
I need the Kick to kick drums
-
Garland
11:11:22 02/27/03
(11)
Re: I need the Kick to kick drums
-
DRCope
07:40:57 03/05/03
(0)
Go Infinate Baffle! (Re: I need the Kick to kick drums)
- Colin Fritzke
11:32:50 03/03/03
(0)
Thanks for the diverse ideas....
-
Garland
10:01:47 02/28/03
(0)
Just for Kicks : ) kinda long
-
ToFo
22:57:20 02/27/03
(0)
Re: I need the Kick to kick drums
- Luxmanlover
20:11:09 02/27/03
(0)
Re:Turn your frown upside down
-
Till E.
17:14:58 02/27/03
(2)
Re:Turn your frown upside down
-
DRCope
08:52:06 02/28/03
(0)
Re:Turn your frown upside down
- Wasteh202
21:33:21 02/27/03
(0)
bridged mono the 555 does 600 watts
- Sam P.
15:43:04 02/27/03
(0)
Re: you need a plant stand
-
bmar
13:20:41 02/27/03
(0)
PiAligned 2245
-
Wayne Parham
12:35:09 02/27/03
(0)
Does the JBL 2370 HORN use screw on or bolt type mounting???
- Adrian Mack
01:56:33 02/27/03
(5)
Standard 3-hole bolt-on mount
-
Wayne Parham
02:24:57 02/27/03
(4)
Re: Standard 3-hole bolt-on mount
- Adrian Mack
05:46:13 02/27/03
(3)
they are the same wayne!
- Adrian Mack
16:19:51 02/28/03
(2)
I've seen references
- Sam P.
07:39:01 03/01/03
(1)
Re: I've seen references
- Adrian Mack
07:54:30 03/01/03
(0)
I'm not only a member....
-
bmar
17:58:31 02/26/03
(8)
aren't the 5.1 outputs
- Sam P.
06:29:38 02/27/03
(2)
Re: aren't the 5.1 outputs
-
bmar
09:09:15 02/27/03
(0)
Re: aren't the 5.1 outputs
-
billfort
06:51:50 02/27/03
(0)
SACD
-
billfort
05:32:34 02/27/03
(1)
Re: SACD
-
bmar
08:58:09 02/27/03
(0)
...bringing it to Lima?
-
Wayne Parham
20:09:34 02/26/03
(2)
Re: ...bringing it to Lima?
-
DRCope
09:01:04 02/28/03
(0)
Re: ...bringing it to Lima?
-
bmar
20:20:35 02/26/03
(0)
Any pictures of the three pi?
-
massappeal85
11:00:12 02/26/03
(5)
π photos
-
Wayne Parham
12:18:26 02/26/03
(4)
Re: π photos
-
massappeal85
16:46:10 02/27/03
(3)
Re: π photos
-
Wayne Parham
22:49:52 02/27/03
(0)
Re: All kinds of ways to cheat
-
Till E.
19:25:00 02/27/03
(1)
Your handiwork is excellent
-
Wayne Parham
21:57:04 02/27/03
(0)
PIEZO TWEETER IN Pi 2 TOWER
-
ports
11:25:47 02/25/03
(1)
KSN-1038 and KSN-1016
-
Wayne Parham
11:46:05 02/25/03
(0)
Pi Logo Stickers
-
RJeff
10:55:11 02/25/03
(1)
Re: Pi Logo Stickers
-
Wayne Parham
11:39:47 02/25/03
(0)
10 Pi Plans
-
crazychile
07:40:07 02/25/03
(1)
You've got mail!
-
Wayne Parham
11:36:07 02/25/03
(0)
DAYTON Pt2 PLANAR TWEETER Q for Wanye
- Vtzzz
10:05:30 02/24/03
(4)
Re: DAYTON Pt2 PLANAR TWEETER Q for Wanye
- thylantyr
10:35:30 02/27/03
(0)
Re: DAYTON Pt2 PLANAR TWEETER Q for Wanye
-
Scholl
05:45:16 02/25/03
(1)
Re: DAYTON Pt2 PLANAR TWEETER Q for Wanye
- TopHat_Guy
13:55:54 03/11/03
(0)
Dayton tweeter
-
Wayne Parham
11:40:46 02/24/03
(0)
Pi 10 build idea
-
Larry
07:09:08 02/24/03
(1)
Re: Pi 10 build idea
-
Wayne Parham
11:57:26 02/24/03
(0)
PI's and amps
-
frog
22:04:24 02/23/03
(2)
Re: PI's and amps
-
trancemitr
11:16:18 02/24/03
(0)
Re: PI's and amps
-
Wayne Parham
01:37:13 02/24/03
(0)
3" open cell foam insulation
-
frog
10:28:25 02/23/03
(2)
Re: 3" open cell foam insulation
-
Wayne Parham
15:44:18 02/23/03
(1)
Thanks Wayne
-
frog
16:32:36 02/23/03
(0)
P.Audio SD-450 N on JBL 2370 Bi-Radial Horn with Wayne Parhams compensation circuit
- Adrian Mack
22:02:26 02/22/03
(27)
two cents from a 2370 user
-
ToFo
22:23:11 02/23/03
(8)
Re: two cents from a 2370 user and compensation circuit!!!!
- Adrian Mack
00:51:50 02/24/03
(7)
2370 caps
-
ToFo
08:19:25 02/24/03
(0)
You've got mail!
-
Wayne Parham
01:17:15 02/24/03
(5)
Re: You've got mail!
- Adrian Mack
01:31:20 02/24/03
(4)
Re: Got it!
- Adrian Mack
01:46:06 02/24/03
(3)
Re: Hey the file you sent is great, I have a few questions though........
- Adrian Mack
02:55:10 02/24/03
(2)
A few answers
-
Wayne Parham
11:49:21 02/24/03
(1)
Thanks!!!!!!
- Adrian Mack
03:34:58 02/25/03
(0)
Re: P.Audio SD-450 N on JBL 2370 Bi-Radial Horn with Wayne Parhams compensation circuit
-
Kramer
14:07:04 02/23/03
(2)
Re: P.Audio SD-450 N on JBL 2370 Bi-Radial Horn with Wayne Parhams compensation circuit
- Adrian Mack
00:53:02 02/24/03
(1)
Re: P.Audio SD-450 N on JBL 2370 Bi-Radial Horn with Wayne Parhams compensation circuit
-
Kramer
15:09:05 02/24/03
(0)
Radial horns
-
Wayne Parham
00:50:16 02/23/03
(14)
Re: Radial horns
-
Alex
01:43:46 02/23/03
(13)
Re: Radial horns
-
bmar
17:24:09 02/23/03
(4)
Re: Radial horns
- Adrian Mack
00:33:02 02/24/03
(3)
Re: Radial horns
-
bmar
12:39:54 02/24/03
(2)
Flanges
- Adrian Mack
03:36:48 02/25/03
(1)
Re: Flanges
-
bmar
07:09:40 02/25/03
(0)
Re: Radial horns
- Adrian Mack
01:57:26 02/23/03
(7)
Re: Radial horns
-
Wayne Parham
02:58:38 02/23/03
(6)
Re: Radial horns
- Adrian Mack
15:23:07 02/23/03
(3)
Re: Radial horns
-
Wayne Parham
15:37:14 02/23/03
(2)
Re: Radial horns
- Adrian Mack
00:40:24 02/24/03
(1)
Re: Radial horns
-
Wayne Parham
01:27:47 02/24/03
(0)
Re: Radial horns
- Adrian Mack
04:18:19 02/23/03
(1)
Re: Radial horns
-
Wayne Parham
05:57:45 02/23/03
(0)
Lima Vinyl
-
DRCope
11:09:50 02/22/03
(3)
Re: Lima Vinyl
-
Wayne Parham
13:50:16 02/22/03
(2)
Re: Lima Vinyl
-
DRCope
20:15:44 02/22/03
(1)
Re: Lima Vinyl
-
Wayne Parham
00:19:55 02/23/03
(0)
4 Pi Theater Plans, Please
-
Bob K
03:18:09 02/22/03
(1)
You've got mail!
-
Wayne Parham
13:35:16 02/22/03
(0)
Alesis RA-300 and Bi-Amped 10Pi - Good Match?
-
Charlie
08:11:39 02/21/03
(2)
Re: Alesis RA-300 and Bi-Amped 10Pi - Good Match?
-
Wayne Parham
14:25:10 02/21/03
(1)
Thanks! (NT)
-
Charlie
15:44:34 02/21/03
(0)
2Pi and sound quality
-
seanmcd
07:12:58 02/21/03
(3)
Re: 2Pi and sound quality
-
Matts
14:17:23 02/21/03
(0)
Re: 2Pi and sound quality
-
Garland
08:39:48 02/21/03
(1)
Re: 2Pi and sound quality
-
JLM
16:48:09 02/23/03
(0)
box sizes and volume
-
frog
04:57:35 02/21/03
(2)
Re: box sizes and volume
-
Wayne Parham
14:32:23 02/21/03
(1)
Re: box sizes and volume
-
frog
07:39:36 02/22/03
(0)
double bass horn
- Michael Ray
11:47:49 02/20/03
(4)
Re: double bass horn
-
JLapaire
09:25:29 03/02/03
(1)
Re: double bass horn
- michael ray
12:51:21 03/05/03
(0)
Ten π or ten π-18
-
Wayne Parham
00:41:11 02/21/03
(0)
Re: double bass horn
- Wasteh202
14:30:39 02/20/03
(0)
Wayne - Check this out (others too.
- thylantyr
10:54:01 02/20/03
(0)
Joints
-
frog
09:34:39 02/20/03
(3)
Biscuits
-
Bob K
17:56:10 02/20/03
(1)
Committee For the Abolition of Yellow Glue
-
Till E.
21:13:32 02/22/03
(0)
dados and rabbets
-
jeff g
09:47:42 02/20/03
(0)
so... i'm thinking of building a system for my girlfriend
-
GaryAR
08:10:51 02/20/03
(1)
Fun stuff!
-
Wayne Parham
12:36:25 02/20/03
(0)
Hi Wayne: Wooden Horns
-
SMB
16:05:33 02/19/03
(2)
Wooden Horns
-
Wayne Parham
00:00:09 02/20/03
(1)
Thanks Wayne <nt>
-
SMB
01:57:33 02/20/03
(0)
Impedance peak
-
Pilkar
12:05:49 02/19/03
(2)
Re: Impedance peak
-
Wayne Parham
12:44:00 02/19/03
(1)
Re: Impedance peak
-
Pilkar
15:51:00 02/19/03
(0)
Ella! Kudos to Brian Cherry and Kevin Haskins.
-
Till E.
16:10:03 02/18/03
(2)
Re: Ella! Kudos to Brian Cherry and Kevin Haskins.
-
Wayne Parham
00:41:39 02/19/03
(1)
Re: Ella! Kudos to Brian Cherry and Kevin Haskins.
-
mikebake
08:41:17 02/19/03
(0)
Is my math right?
- Dangus
15:01:10 02/18/03
(2)
Re: Is my math right?
- bsuhy
18:17:15 02/18/03
(1)
Re: Is my math right?
- Dangus
20:15:24 02/18/03
(0)
Need help from the "crossover" experts!
-
Paul
16:36:57 02/17/03
(4)
First-order with conjugate Zobel
-
Wayne Parham
20:48:57 02/17/03
(3)
Re: First-order with conjugate Zobel
-
Paul
05:57:10 02/18/03
(2)
Re: First-order with conjugate Zobel
-
Wayne Parham
15:38:13 02/18/03
(1)
Many thanks...!
-
Paul B
16:39:52 02/18/03
(0)
YAMAHA NS1000M
- SA
15:28:23 02/17/03
(1)
Re: YAMAHA NS1000M
-
manzanita
16:09:08 03/06/03
(0)
premium 4 cabinet
- djstan
10:31:05 02/17/03
(1)
You've got mail!
-
Wayne Parham
12:23:11 02/17/03
(0)
Adjust size of 3Pi or 4Pi cabinet if placing horn outside?
-
Patrick Kopson
19:44:59 02/16/03
(1)
Displacement volume
-
Wayne Parham
01:06:12 02/17/03
(0)
JeffG's 2Pi's
-
Garland
18:04:46 02/16/03
(10)
Re: JeffG's 2Pi's
- Dangus
06:03:13 02/18/03
(2)
how come people keep making fun of my tv?
-
jeff g
09:59:04 02/18/03
(1)
'Cause it's soooo groovy!
-
Wayne Parham
15:40:36 02/18/03
(0)
Re: JeffG's 2Pi's
-
jeff g
18:15:02 02/16/03
(6)
Interesting look!
-
Wayne Parham
01:08:36 02/17/03
(0)
Very nice....
-
ToFo
00:27:22 02/17/03
(0)
Re: nice job!
- Wasteh202
19:30:00 02/16/03
(0)
Re: JeffG's 2Pi's
-
bmar
18:44:27 02/16/03
(2)
sandbox
-
jeff g
04:57:27 02/17/03
(1)
Re: sandbox
-
Garland
10:28:05 02/17/03
(0)
Rectangular port on stage series 4 pi?
-
massappeal85
12:24:14 02/16/03
(4)
Re: Rectangular port on stage series 4 pi
-
Wayne Parham
16:24:30 02/16/03
(1)
Re: Rectangular port on stage series 4 pi
-
massappeal85
18:21:33 02/18/03
(0)
7 Pi's ready for MAF
-
bmar
11:34:28 02/16/03
(14)
Question on construction
-
RJeff
11:10:11 02/17/03
(3)
Re: Question on construction
-
bmar
17:52:14 02/17/03
(0)
Re: Question on construction
-
mikebake
14:23:19 02/17/03
(1)
No can do
-
RJeff
18:11:30 02/17/03
(0)
nice job!!!!
-
replay
07:01:08 02/17/03
(2)
I bet he turned the small wooden vases(candlesticks?)nt
-
Garland
10:29:58 02/17/03
(1)
Re: vases yes, clocks no! <nt>
-
bmar
17:53:29 02/17/03
(0)
Re: 7 Pi's ready for MAF
-
JLapaire
05:22:00 02/17/03
(1)
Re: 7 Pi's ready for MAF
-
bmar
18:01:59 02/17/03
(0)
:o
-
gonefishin
20:49:46 02/16/03
(0)
(*#%^%$(^$#@(^*($A@!! nt
-
mikebake
19:59:10 02/16/03
(0)
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! (nt)
-
Till E.
12:47:51 02/16/03
(2)
Re: !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
-
steve f
13:07:39 02/16/03
(1)
Re: !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
-
Wayne Parham
16:26:28 02/16/03
(0)
bypass Martin Logan xover
- dend
08:52:34 02/16/03
(1)
Re: bypass Martin Logan xover
-
ToFo
00:18:34 02/17/03
(0)
Port sizes?
- mason
07:42:57 02/15/03
(4)
Re: Port sizes?
-
mollecon
11:27:22 02/15/03
(3)
Oops...
-
mollecon
11:38:20 02/15/03
(2)
Great explaination!
-
Wayne Parham
15:43:16 02/15/03
(0)
Thank you for your time explaining!
- mason
14:55:55 02/15/03
(0)
Ella sighting, or..., a new passive pre, or... teeing off with a three wood
-
Till E.
19:55:33 02/14/03
(1)
Re: Ella sighting, or..., a new passive pre, or... teeing off with a three wood
-
Garland
06:02:34 02/15/03
(0)
Driver for front-loaded horn
- Dangus
14:39:41 02/13/03
(4)
Re: Driver for front-loaded horn
-
Wayne Parham
15:18:59 02/13/03
(3)
Re: Driver for front-loaded horn
- Dangus
16:52:04 02/13/03
(2)
Re: Driver for front-loaded horn
-
Wayne Parham
01:13:55 02/14/03
(1)
Re: Driver for front-loaded horn
- Dangus
06:55:14 02/14/03
(0)
Which type of horn flare for small room?
-
jlharden
04:20:05 02/13/03
(3)
Several good choices
-
Wayne Parham
13:32:19 02/13/03
(2)
Re: Several good choices
-
jlharden
11:06:38 02/16/03
(1)
Re: Several good choices
-
Wayne Parham
16:18:45 02/16/03
(0)
Roll Call - MAF 2003
-
Wayne Parham
00:21:06 02/13/03
(1)
Re: Roll Call - MAF 2003
-
DRCope
12:47:13 02/17/03
(0)
2 Pi bracing
-
frog
21:54:29 02/11/03
(1)
Re: 2 Pi bracing
-
Wayne Parham
22:58:21 02/11/03
(0)
How many lemmings to Lima???
-
Robert Hamel
16:44:15 02/10/03
(17)
The website is starting to get updated
-
mikebake
20:43:01 02/14/03
(0)
Re: How many lemmings to Lima???
- spkrman57
04:12:04 02/14/03
(0)
Things to do and see at MAF 2003
-
Wayne Parham
00:06:14 02/13/03
(1)
We will definitely have Till and Bmar do a woodworking clinic!
-
mikebake
20:41:05 02/14/03
(0)
I'll be there....
-
ALFREDO
07:38:16 02/12/03
(0)
Re: How many lemmings to Lima???
-
billfort
05:43:26 02/12/03
(0)
Re: Just try and stop me!
-
Till E.
19:35:28 02/11/03
(4)
Re: Just try and stop me!
-
Wayne Parham
00:23:17 02/13/03
(0)
Bistro, good idea
-
mikebake
20:01:09 02/11/03
(2)
Re: Bistro, good idea
-
Wayne Parham
00:31:54 02/13/03
(1)
Re: Bistro, good idea
-
mikebake
20:47:06 02/14/03
(0)
Re: you bet
-
bmar
16:42:07 02/11/03
(1)
Re: you bet
-
Wayne Parham
00:26:06 02/13/03
(0)
Re: How many lemmings to Lima???
-
gonefishin
15:00:24 02/11/03
(0)
Count me in!
-
Wayne Parham
04:54:57 02/11/03
(0)
i'll be there
-
replay
17:28:07 02/10/03
(1)
Re: i'll be there
-
Wayne Parham
00:24:27 02/13/03
(0)
Speaker impedance?
-
massappeal85
16:18:36 02/10/03
(1)
You've got mail!
-
Wayne Parham
04:41:18 02/11/03
(0)
60hz-220hz peak problem
-
bmar
17:47:51 02/09/03
(4)
Re: 60hz-220hz peak problem
-
Wayne Parham
22:14:32 02/09/03
(3)
Re: 60hz-220hz peak problem
-
bmar
22:37:38 02/09/03
(2)
Re: 60hz-220hz peak problem
-
Wayne Parham
23:15:13 02/09/03
(1)
Re: 60hz-220hz peak problem
-
bmar
20:03:05 02/10/03
(0)
Two questions
-
Pilkar
09:58:20 02/09/03
(4)
Two answers
-
Wayne Parham
13:40:40 02/09/03
(3)
Re: Two answers
-
Pilkar
12:51:16 02/10/03
(1)
Make the port 4.5 inches long
-
Wayne Parham
04:49:49 02/11/03
(0)
Re: Two answers
-
Pilkar
15:40:49 02/09/03
(0)
What is your tolerance for background noise
-
mikebake
19:16:53 02/08/03
(5)
Re: What is your tolerance for background noise
-
DRCope
12:04:53 02/19/03
(0)
Re: What is your tolerance for background noise
- Wasteh202
05:45:18 02/09/03
(0)
Re: What is your tolerance for background noise
-
Robert Hamel
20:43:09 02/08/03
(0)
Re: What is your tolerance for background noise
-
replay
20:18:52 02/08/03
(0)
Re: What is your tolerance for background noise
-
Wayne Parham
19:35:54 02/08/03
(0)
Anybody want to hear about Ella?
-
Till E.
18:00:35 02/08/03
(18)
Re: Anybody want to hear about Ella?
-
JLM
15:14:21 02/13/03
(0)
Tube burn in on Ella!
- spkrman57
05:56:32 02/09/03
(0)
Re: Anybody want to hear about Ella?
-
Till E.
20:37:09 02/08/03
(11)
Chiming in on the digitalitis...
-
Garland
10:52:53 02/10/03
(2)
Sorry, just noticed that the bulk of my message was deleted somehow!?
-
Garland
05:01:31 02/12/03
(0)
Re: Chiming in on the digitalitis...
-
bmar
19:17:35 02/11/03
(0)
Re: Anybody want to hear about Ella?
-
mikebake
18:11:09 02/09/03
(1)
Re: Anybody want to hear about Ella?
-
Crazy Dave
09:25:25 02/10/03
(0)
Re: Anybody want to hear about Ella?
- Wasteh202
05:34:29 02/09/03
(0)
Re: Anybody want to hear about Ella?
- Wasteh202
05:31:06 02/09/03
(0)
Re: Anybody want to hear about Ella?
-
Bob K
04:16:35 02/09/03
(0)
Great write-up, thanks!
-
Wayne Parham
00:55:28 02/09/03
(0)
Re: Anybody want to hear about Ella?
-
bmar
21:58:33 02/08/03
(0)
definitely centerfold material!
-
replay
21:16:27 02/08/03
(0)
Consonance amp?
-
Wayne Parham
19:31:40 02/08/03
(0)
ella fitzgerald or ella mcpherson?
-
replay
19:10:39 02/08/03
(1)
Re: ella fitzgerald or ella mcpherson?
-
mikebake
19:18:33 02/08/03
(0)
Dude!
-
mikebake
19:05:59 02/08/03
(0)
Location and size of binding posts on Pi 2 Towers?
-
RJeff
11:18:15 02/07/03
(1)
2.875" wide and 2.175" tall
-
Wayne Parham
14:24:11 02/07/03
(0)
"wire is wire" dept.
- Sam P.
07:21:37 02/07/03
(2)
Re: "wire is wire" dept.
-
Chris R
17:56:27 02/07/03
(1)
forgot to mention that:)
- Sam P.
18:21:06 02/07/03
(0)
New DIY Pi Speaker owner and have build questions
-
gumby1
01:17:21 02/07/03
(2)
Things and stuff
-
Wayne Parham
01:50:22 02/07/03
(1)
Re: Things and stuff
-
gumby1
18:49:27 02/07/03
(0)
Baffle step correction
-
Colin
00:59:42 02/07/03
(1)
Re: Baffle step correction
-
Wayne Parham
01:12:53 02/07/03
(0)
Life beyond 1" ?
-
bmar
18:41:21 02/06/03
(20)
Re: Life beyond 1" ?
-
PK
11:40:07 02/07/03
(2)
Re: Life beyond 1" ?
-
bmar
08:00:11 02/08/03
(1)
Thanks!
-
PK
14:19:58 02/08/03
(0)
Re: Life beyond 1" ?
-
ALFREDO
07:29:24 02/07/03
(5)
Alfredo...
-
gonefishin
13:16:07 02/07/03
(4)
I think so......
-
alfredo
10:04:10 02/09/03
(3)
Re: I think so......
-
gonefishin
05:53:51 02/10/03
(2)
Re: I think so......
-
ALFREDO
10:58:15 02/10/03
(1)
Re: I think so......
-
gonefishin
13:01:23 02/11/03
(0)
Re: Life beyond 1" ?
-
Wayne Parham
00:07:04 02/07/03
(1)
Maybe 'The Angry Inch'?
-
mollecon
04:08:44 02/07/03
(0)
Re: Life beyond 1" ?
-
replay
21:32:03 02/06/03
(2)
Re: Life beyond 1" ?
-
bmar
06:32:10 02/07/03
(0)
Re: Life beyond 1" ?
-
Wayne Parham
00:35:06 02/07/03
(0)
Re: Life beyond 1" ?
-
mikebake
18:51:53 02/06/03
(5)
Re: Life beyond 1" ?
-
bmar
19:03:40 02/06/03
(4)
Re: Life beyond 1" ?
-
mikebake
19:17:10 02/06/03
(3)
Re: Life beyond 1" ?
-
bmar
19:42:46 02/06/03
(2)
Re: Life beyond 1" ?
-
Wayne Parham
00:33:01 02/07/03
(1)
Re: Life beyond 1" ?
-
bmar
06:41:49 02/07/03
(0)
New browser; looking for suitable kit for 8 watt 2A3PSE kit
-
Steebo
15:46:32 02/06/03
(3)
Speaker suggestions for 8 watt 2A3PSE amp
-
Wayne Parham
23:57:01 02/06/03
(2)
Re: Speaker suggestions for 8 watt 2A3PSE amp
-
Steebo
04:42:23 02/07/03
(1)
You've got mail!
-
Wayne Parham
12:07:07 02/07/03
(0)
Compare Thermionic 3pi and tower 2pi
-
SteveBrown
15:22:24 02/06/03
(1)
Re: Compare Thermionic 3pi and tower 2pi
-
Wayne Parham
23:43:21 02/06/03
(0)
2pi tower dimensions, using 3/4" mdf
- bsuhy
13:42:57 02/06/03
(1)
Re: 2pi tower dimensions, using 3/4" mdf
-
Wayne Parham
13:47:24 02/06/03
(0)
Wayne: Advice for EV LS12A drivers in Pi Alignment?
-
BobCat
11:06:37 02/06/03
(1)
Advice for EV LS12A drivers in Pi Alignment
-
Wayne Parham
13:44:27 02/06/03
(0)
interconnect question
-
replay
06:41:36 02/06/03
(12)
interconnect answer
-
Wayne Parham
13:56:02 02/06/03
(7)
i'll be there!
-
replay
17:53:12 02/06/03
(6)
Re: i'll be there!
-
Wayne Parham
23:10:55 02/06/03
(0)
Flying
-
mikebake
18:39:30 02/06/03
(4)
Logistics
-
Wayne Parham
23:03:05 02/06/03
(3)
That is easy
-
mikebake
13:38:10 02/07/03
(2)
Re: That is easy
-
Wayne Parham
14:48:28 02/08/03
(1)
Cool
-
mikebake
15:00:05 02/08/03
(0)
well, found something cool!
-
ToFo
10:01:00 02/06/03
(0)
Canare, Cool!
-
ToFo
09:36:21 02/06/03
(2)
bryston uses....
-
replay
11:52:58 02/06/03
(1)
Thanks, I think i'll try that!
-
ToFo
15:33:39 02/06/03
(0)
Wayne, you've got to see the Feb. issue of AudioXpress!
-
Crazy Dave
20:24:02 02/05/03
(5)
unfortunately, the bozo's tested
- Sam P.
06:50:16 02/06/03
(3)
Re: unfortunately, the bozo's tested
-
Crazy Dave
07:53:20 02/06/03
(2)
Phase and Imaging
-
Wayne Parham
22:57:44 02/06/03
(1)
Re: Phase and Imaging
-
Crazy Dave
12:21:47 02/07/03
(0)
Reviews
-
Wayne Parham
21:48:28 02/05/03
(0)
Plywood vs. MDF
-
frog
11:50:42 02/05/03
(1)
Re: Plywood vs. MDF
-
Wayne Parham
14:16:00 02/05/03
(0)
three Pi kits
-
massappeal85
08:20:31 02/04/03
(4)
Re: three Pi kits
-
massappeal85
08:21:51 02/04/03
(3)
You've got mail!
-
Wayne Parham
12:19:42 02/04/03
(2)
Re: You've got mail!
-
massappeal85
14:52:02 02/04/03
(1)
Re: You've got mail!
-
Wayne Parham
15:56:10 02/04/03
(0)
My first kit, any words of wisdom would be appreciated
- bsuhy
06:51:13 02/04/03
(12)
Re: My first kit, any words of wisdom would be appreciated
- bsuhy
14:54:36 02/05/03
(1)
Re: My first kit, any words of wisdom would be appreciated
-
Wayne Parham
16:30:46 02/05/03
(0)
"A Wet Bird Never Flies At Night"
-
Till E.
10:44:14 02/04/03
(2)
"Never eat spinach with a stranger"
- Luxmanlover
05:22:22 02/05/03
(0)
Re: "A Wet Bird Never Flies At Night"
-
bmar
17:45:14 02/04/03
(0)
Measure twice cut once and just take your time nt.
-
Robert Hamel
09:40:59 02/04/03
(0)
Re: Check archives
-
Matts
08:00:34 02/04/03
(0)
Re: My first kit, any words of wisdom would be appreciated
- OscarL
07:00:38 02/04/03
(4)
Re: My first kit, any words of wisdom would be appreciated
- bsuhy
07:19:48 02/04/03
(3)
Re: My first kit, any words of wisdom would be appreciated
-
Wayne Parham
12:24:34 02/04/03
(2)
Re: My first kit, any words of wisdom would be appreciated
- Bsuhy
13:03:04 02/04/03
(1)
You've got mail!
-
Wayne Parham
16:11:04 02/04/03
(0)
One or Two PI
-
frog
15:24:12 02/03/03
(0)
a small update
-
bmar
19:07:12 02/02/03
(6)
Those are really nice!!! nt.
-
Robert Hamel
09:43:11 02/04/03
(0)
Re: Thanks
-
bmar
18:04:35 02/03/03
(0)
Sweet!
-
Wayne Parham
11:51:41 02/03/03
(0)
Nice Job Bill!!!! (NT)
-
ALFREDO
10:41:21 02/03/03
(0)
outstanding!
-
billfort
10:15:55 02/03/03
(0)
beauty!!!!! nt
-
replay
07:01:09 02/03/03
(0)
Studio Series 2Pi Comparison(long)
- Wasteh202
11:58:39 02/02/03
(14)
Not quite...
-
mollecon
08:18:32 02/05/03
(0)
Don't count them out yet!
-
ToFo
11:04:02 02/03/03
(2)
Re: Don't count them out yet!
- Wasteh202
01:37:24 02/05/03
(1)
Re: Don't count them out yet!
-
ToFo
13:56:09 02/05/03
(0)
Re: Studio Series 2Pi Comparison(long)
-
Garland
09:44:01 02/03/03
(0)
Re: Never have understood the hype...
-
Matts
08:21:56 02/03/03
(1)
Re: Never have understood the hype...
- Wasteh202
01:33:55 02/05/03
(0)
it's all about dynamics..................
-
replay
07:08:43 02/03/03
(1)
Re: it's all about dynamics..................
- Wasteh202
23:45:20 02/04/03
(0)
Re: Studio Series 2Pi Comparison(long)
-
Mike Borzcik
20:06:54 02/02/03
(1)
Re: Studio Series 2Pi Comparison(long)
- Wasteh202
02:47:39 02/05/03
(0)
Re: Studio Series 2Pi Comparison(long)
-
steve f
16:50:16 02/02/03
(2)
Re: Studio Series 2Pi Comparison(long again)
- Wasteh202
22:48:22 02/04/03
(1)
Re: Studio Series 2Pi Comparison(long again)
-
steve f
19:10:15 02/05/03
(0)
[
Pi Speakers
] [
Audio Round Table
] [
Posting Rules
] [
Help
] [
Previous Posts
]
Copyright © 2003
π
Speakers
