Posted by Shane [ 69.149.171.217 ] on September 01, 2005 at 00:19:04:
In Reply to: Re: 2 pi speaker terminal idea posted by Wayne Parham on August 31, 2005 at 23:02:53:
Basically, yes. An access panel. I really don't want any removable panels either, but it seems it could be a pain if you "needed" to do anything in the lower half of the cabinet for some reason or another. The braces would pretty much stop you I think. I was thinking just cut out a 6x6 piece out of the back, glue it to a a 7x7" piece of 1/2", and cut a hole through both for the terminal box. This way the "void" in the actual back panel is nearly filled back up (except for the saw kerf) when you replace the whole piece. Then just seal between the 7x7 piece and the back. I can just see me putting in the damping, glueing the front on, and needing to do something with the damping after the fact. It's just a idea. I'm always looking down the road to future situations.
[ PiSpeakers Forum ] [ Help ]