Posted by Wayne Parham [ 67.66.228.230 ] on February 29, 2004 at 02:28:12:

In Reply to: CrossOver questions on 4 Pi posted by Haknhendrix on February 28, 2004 at 19:48:06:

We make tweeter compensation cable assemblies using blocks of 16 ohm, 10 watt, non-inductive resistors. Four of them connected in series-parallel are used for R1 and another four are used for R2. Capacitor C1 is a polypropylene film/foil 0.47µF capacitor. For the woofer Zobel network, we use a 100 watt 8 ohm resistor and a 20uF 250V capacitor. You can see how these cables look in the post called "Compensation networks - Photos."

Suitable parts from Parts Express include the 004-16 16 ohm (R1/R2) resistors, 027-458 0.47µF (C1) capacitor, 019-020 (R3) 8 ohm resistor and 027-436 20µF (C5) capacitor.

Replies:

• Re: CrossOver questions on 4 Pi - GarMan 15:38:10 03/03/04 (3)
  • Re: CrossOver questions on 4 Pi - Wayne Parham 20:47:12 03/03/04 (2)
    • Crossover Wire Recommendation - Haknhendrix 10:23:59 03/05/04 (1)
      • Re: Crossover Wire Recommendation - Wayne Parham 19:09:49 03/05/04 (0)
• Re: CrossOver questions on 4 Pi - Haknhendrix 11:03:20 03/03/04 (0)