AudioRoundTable.com: Group Build » troubleshooting continued.

Home » Audio » Group Build » troubleshooting continued.

Show: Today's Messages :: Navigator :: Polls
E-mail to friend

198DCV from B+ to B- for Guinevere [message #30926 is a reply to message #30913]

Thu, 10 March 2005 21:31

colinhester
Messages: 1349
Registered: May 2009
Location: NE Arkansas

Illuminati (3rd Degree)

I measured between the PS cap terminals tonight and got 198DCV. You said you were getting close to 300DCV. Correct? I confirmed I have the blue w/red strip hooked up to the rectifier. What choke are you using? I went with the 193C.

Did you get the LED dimming problem sorted out? If you went with the Belden cable, be sure only one end of the connection is grounded. It sounds like your losing current to the ground. Look for nicks or cuts in the cables's wrap. Also, test continuity between the signal path and ground, there should be none.

PLEASE give me a call.....Colin

http://audioroundtable.com/GroupBuild/messages/934.html

Report message to a moderator

[Message index]

		troubleshooting continued. By: Manualblock on Thu, 10 March 2005 15:52
		Current between ground and plate? By: colinhester on Thu, 10 March 2005 16:05
		Re: Current between ground and plate? By: Manualblock on Thu, 10 March 2005 18:33
		Measuring current By: colinhester on Thu, 10 March 2005 18:50
		Re: Measuring current By: PakProtector on Thu, 10 March 2005 21:20
		How much difference? By: colinhester on Fri, 11 March 2005 08:48
		Re: How much difference? By: PakProtector on Fri, 11 March 2005 09:01
		Re: troubleshooting continued. By: PakProtector on Thu, 10 March 2005 16:26
		Re: troubleshooting continued. By: Manualblock on Thu, 10 March 2005 18:27
		that's the funny part... By: PakProtector on Thu, 10 March 2005 18:50
		Re: that's the funny part... By: Manualblock on Fri, 11 March 2005 09:20
		Re: that's the funny part... By: PakProtector on Fri, 11 March 2005 09:36
		Re: that's the funny part... By: Manualblock on Fri, 11 March 2005 11:42
		198DCV from B+ to B- for Guinevere By: colinhester on Thu, 10 March 2005 21:31
		Re: 198DCV from B+ to B- for Guinevere By: Manualblock on Fri, 11 March 2005 09:19

Previous Topic:	Carbon comp vs carbon as grid stoppers
Next Topic:	Call this evening

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Sat Jun 08 13:49:26 CDT 2024