AudioRoundTable.com - RDF feed
https://audioroundtable.com/forum/index.php
3pi crossover
https://audioroundtable.com/forum/index.phpindex.php?t=rview&goto=88426&th=22024#msg_88426
dbbarnes22018-07-12T04:13:46-00:00Re: 3pi crossover
https://audioroundtable.com/forum/index.phpindex.php?t=rview&goto=88427&th=22024#msg_88427
There is no L3 coil in the three π loudspeaker. A wire jumper is used in place of a coil in position L3.
]]>Wayne Parham2018-07-12T13:55:14-00:00Re: 3pi crossover
https://audioroundtable.com/forum/index.phpindex.php?t=rview&goto=88428&th=22024#msg_88428
dbbarnes22018-07-12T19:05:52-00:00Re: 3pi crossover
https://audioroundtable.com/forum/index.phpindex.php?t=rview&goto=88429&th=22024#msg_88429
Each model uses a different crossover. The midwoofer circuits are usually pretty similar and the tweeter circuits are almost always nearly the same, except for the R1/R2 values. But different drivers use slightly different parts.
You can learn more about the design/optimization process at the link below: