Home » Sponsored » Pi Speakers » It must be the Auricaps
It must be the Auricaps [message #46699] Mon, 11 April 2005 19:09 Go to previous message
BillEpstein is currently offline  BillEpstein
Messages: 886
Registered: May 2009
Illuminati (2nd Degree)
I played with the polarity as Russell and Ron recommended and maybe reversing the horn toned down the shrillness a little.
That was with 15 R1 and R2 and .33 Clarity cap.
I added .1 Clarity which helped a little more so then I tore it up and made a new attenuator with .47 Auricap. Still 10dB 15 and 15.
Auricap is smoother, no doubt and the bigger value mid-range balances the highs a little better.
I wonder if Auricaps sound so good because they round off the edges?
I'm close to ordering those expensivo TRT Dynamicaps.
Still, volume up is not good, even on vinyl.
I had 30 and 60 Ohms R1 and R2 on the 16 Ohm crossover I liked so well so obviously I need to try 12 dB attenuation.
Stay tuned.

 
Read Message
Read Message
Read Message
Previous Topic: Reconing JBL 2245 to 2241
Next Topic: home theater speaker recommendations
Goto Forum:
  


Current Time: Sat Aug 03 21:56:31 CDT 2024

Sponsoring Organizations

DIY Audio Projects
DIY Audio Projects
OddWatt Audio
OddWatt Audio
Pi Speakers
Pi Speakers
Prosound Shootout
Prosound Shootout
Miller Audio
Miller Audio
Tubes For Amps
TubesForAmps.com

Lone Star Audiofest