AudioRoundTable.com: Pi Speakers » crossover electronics

Home » Sponsored » Pi Speakers » crossover electronics

Show: Today's Messages :: Navigator :: Polls
E-mail to friend

crossover electronics [message #45718]

Tue, 02 November 2004 12:14

Tony Valetti
Messages: 4
Registered: May 2009

Esquire

Hi, I have gone through the archives with interest. There is one thing that I would like clarified. At http://audioroundtable.com/PiSpeakers/messages/12812.html the crossover electronics lab101 handout shows big peaks in some. What is the purpose of those? I want flat response, and those peaks look pretty bad to me. Also, the woofer connected through a simple LC crossover shows a peak. Why is that? There is nothing that I could see that would cause such a peak? I'm very interested in your response.
Thanks, Tony

Report message to a moderator

[Message index]

		crossover electronics By: Tony Valetti on Tue, 02 November 2004 12:14
		Re: crossover electronics By: Wayne Parham on Tue, 02 November 2004 14:59
		Re: crossover electronics By: Tony Valetti on Tue, 02 November 2004 16:09
		Re: crossover electronics By: GarMan on Tue, 02 November 2004 15:27
		Re: crossover electronics By: Tony Valetti on Tue, 02 November 2004 16:18
		Re: crossover electronics By: GarMan on Wed, 03 November 2004 07:40
		Re: crossover electronics By: Tony Valetti on Wed, 03 November 2004 12:33
		Re: crossover electronics By: GarMan on Wed, 03 November 2004 20:35

Previous Topic:	Anyone into guitar, 4X12 cab. plans needed.
Next Topic:	Studio 2's Finished, check them out.

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Tue Nov 26 11:06:13 CST 2024