AudioRoundTable.com: Pi Speakers » Could the PSD-2002 be $500 if it was made in Europe?

Home » Sponsored » Pi Speakers » Could the PSD-2002 be $500 if it was made in Europe?

Show: Today's Messages :: Navigator :: Polls
E-mail to friend

Could the PSD-2002 be $500 if it was made in Europe? [message #44881]

Sat, 03 July 2004 21:24

BillEpstein
Messages: 886
Registered: May 2009

Illuminati (2nd Degree)

I no longer have them, but I'm getting the itch to acquire another pair. I've been living with the Altec 806A for quite awhile now. I recently took them off the 811B horns and got Bill's Woodhorns out. Much better. The Woodhorns are actually more detailed than the aluminum but none of the over ring artifacts. Still, the 806A is bright sounding. And so is Ella. And so are most CD's.
I remember the PSD as sweeter and more musical than either the Altecs or the 2428 horns in my 3677 surrounds.
Can you cross them at 800 Hz?
Anybody have another/same opinion?

Report message to a moderator

[Message index]

		Could the PSD-2002 be $500 if it was made in Europe? By: BillEpstein on Sat, 03 July 2004 21:24
		Re: Could the PSD-2002 be $500 if it was made in Europe? By: Wayne Parham on Sat, 03 July 2004 23:24
		Re: No By: Bill Martinelli on Sat, 03 July 2004 23:44
		Your 4 Pi Stage Series?.. By: James W. Johnson on Thu, 08 July 2004 09:24
		Re: Your 4 Pi Stage Series?.. By: Bill Martinelli on Thu, 08 July 2004 19:13
		Re: Your 4 Pi Stage Series?.. By: Bill Martinelli on Thu, 08 July 2004 19:17
		Re: Could the PSD-2002 be $500 if it was made in Europe? By: steve f on Mon, 05 July 2004 20:11

Previous Topic:	What is the Pro 4 Pi's net volume and tuning?
Next Topic:	how to make a rectangular port

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Mon May 06 14:01:24 CDT 2024