AudioRoundTable.com: Pi Speakers » taming the piezoelectric

Home » Sponsored » Pi Speakers » taming the piezoelectric

Show: Today's Messages :: Navigator :: Polls
E-mail to friend

Re: taming the piezoelectric [message #43882 is a reply to message #43880]

Mon, 09 February 2004 07:17

GarMan
Messages: 960
Registered: May 2009

Illuminati (2nd Degree)

Putting a resistor across the binding post or a cap in series with the tweeter will both tame the piezo, but in different ways. I found that the cap will attenuate the piezo, while the resistor "mellows" it out.

Values you may want to try are:
0.1uF for -6dB
0.3uF for -3dB

Try a 50, 22, or 12 ohm resistor across the binding post for a small, medium and large "mellow" effect.

Gar.

Report message to a moderator

[Message index]

		taming the piezoelectric By: wasteh202 on Sun, 08 February 2004 21:39
		Re: taming the piezoelectric By: gumby1 on Mon, 09 February 2004 00:28
		Re: taming the piezoelectric By: wasteh202 on Mon, 09 February 2004 10:16
		Re: taming the piezoelectric By: jlharden on Mon, 09 February 2004 11:10
		Re: taming the piezoelectric By: wasteh202 on Mon, 09 February 2004 14:10
		Re: taming the piezoelectric By: steve f on Mon, 09 February 2004 20:29
		Re: taming the piezoelectric By: wasteh202 on Tue, 10 February 2004 09:37
		Re: taming the piezoelectric, attn: Bill Epstein By: jlharden on Tue, 10 February 2004 07:54
		Re: taming the piezoelectric, attn: Bill Epstein By: BillEpstein on Tue, 10 February 2004 15:26
		Re: taming the piezoelectric, attn: Bill Epstein By: jlharden on Tue, 10 February 2004 19:10
		Re: taming the piezoelectric By: GarMan on Mon, 09 February 2004 07:17
		Re: taming the piezoelectric By: ports on Tue, 10 February 2004 10:20
		Re: taming the piezoelectric By: GarMan on Wed, 11 February 2004 20:11

Previous Topic:	2pi tower pics
Next Topic:	Recommendation on Horn Flare for 4 Pi

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Mon May 13 17:18:58 CDT 2024