Woofer-tweeter [message #39863] |
Sun, 12 January 2003 12:08 |
Mike Centracchio
Messages: 18 Registered: May 2009
|
Chancellor |
|
|
Could use help, I came across a woofer and a tweeter cheap, so I bought them. The woofer is a Selenium 8pw2, 8 inch, 8 ohm, 70-8000 Hz, 94 dB SPL. The tweeter is a KSN1036A 3000-40000 Hz SPL, 90 dB Selenium suggests a .66 cu/ft ported box (3 inch dia x 2 inch lg) I took a look at (basic piezo x-o) found on a link in this forum. I guess I could use these cap, and inductor figures for a cross at 3500 or so. Also had the idea to model it after 1Pi, using just a woofer inductor. My main question is how to compensate for the difference in the dB SPL between the woofer and tweeter. Any help is appreciated Thanks Mike
|
|
|