Home » Sponsored » Pi Speakers » pi 7 and suitable driver,and wayne,dont u get tired of this lol
pi 7 and suitable driver,and wayne,dont u get tired of this lol [message #39158] Fri, 22 November 2002 02:54 Go to previous message
portedmike is currently offline  portedmike
Messages: 6
Registered: May 2009
Esquire
1st Question: can i use any driver for pi7 corner loaded sub.
for example:

Fs=44hz
Q=0.2
Vas=(stiff)
efficient and low excursion
12inch.

and...

Fs=24hz
Q=0.35
Vas=113litres
Excursion=9mm
12inch.

i dont really have 4ft clear space even,wil i stil get some gain/?
but how much :-S

also,should i measure my room and guess the resonances?because its a bedroom,and its 1.9mwide,and approx 2x that in length.its low ceilings also.

2nd question : is the 6ft clear space reccomended alot,becase the 'response on the pispeakers site,show that the speakers by themselves are often -6db at 50hz for example...so i dont want that situation with no room gain because its crammed with furniture :-D

am i right saying that u can have much smaller boxes because the resonance can be higher ,using room gain?
and its simply a ported box ? with those side slots?

if so,send me some plans wayne :-D im interested in a few Db more effiency for free :-P
meanwhile,il test out the pi align program :)

 
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Previous Topic: JBL 4648A with SET's?
Next Topic: Crossover for the 604-8G
Goto Forum:
  


Current Time: Mon Sep 16 21:30:37 CDT 2024

Sponsoring Organizations

DIY Audio Projects
DIY Audio Projects
OddWatt Audio
OddWatt Audio
Pi Speakers
Pi Speakers
Prosound Shootout
Prosound Shootout
Miller Audio
Miller Audio
Tubes For Amps
TubesForAmps.com

Lone Star Audiofest