AudioRoundTable.com: Pi Speakers » good plywood? bad plywood? I'm the plywood with the gun.

Home » Sponsored » Pi Speakers » good plywood? bad plywood? I'm the plywood with the gun.

Show: Today's Messages :: Navigator :: Polls
E-mail to friend

good plywood? bad plywood? I'm the plywood with the gun. [message #36094]

Wed, 24 April 2002 00:46

dbeardsl
Messages: 127
Registered: May 2009

Master

I cut up a $50 4X8 of veneered Birch today, beautiful on the outisde. After the second cut I looked down and the plywood and split, right between the 2nd and 3rd ply, all 48" the ply's just seperated about 1" and about 10" making a really tall narrow Y when look at from the side. I did my best to glue and clamp one half. I'm gonna go back to the place I got em from and make em give me another one.

The skil saw cutting guide I bought rocked though, I've never had such staight cuts.

Question, once I get it all cut and ready, any reccomendations for glue? And how about application (brush? sponge? index finger?) (I'm doing 3/8" rabbit joints).

Report message to a moderator

[Message index]

		good plywood? bad plywood? I'm the plywood with the gun. By: dbeardsl on Wed, 24 April 2002 00:46
		dang its late. By: dbeardsl on Wed, 24 April 2002 00:52

Previous Topic:	initial exponential horn design
Next Topic:	Filling screw holes for Veneer

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Wed Nov 27 12:35:28 CST 2024