AudioRoundTable.com: Pi Speakers » crossover design... help....

Home » Sponsored » Pi Speakers » crossover design... help....

Show: Today's Messages :: Navigator :: Polls
E-mail to friend

crossover design... help.... [message #35968]

Mon, 15 April 2002 06:46

Pilkar
Messages: 19
Registered: May 2009

Chancellor

hi Wayne,
i`m building a 2 way speaker (conventional bass reflex) and i want to build the crossovers myself... i will use this two drivers: Selenium WPU1205 and Selenium D405Ti on a Selenium HL14-50 horn... which data should i look for building the crossover? i plan to cross them at 2k2 with a 12dB/oct. slope... how can i know if i need a compensation network or the damper or both? i read the doc file that explains how to do it... but it is a little difficult for me to understand everything... do you have a simple way to calculate the crossover and compensation network components? i will build a 40 liter box and will be tuned to 55Hz... can you help me?

thank you very much

Matias

Report message to a moderator

[Message index]

		crossover design... help.... By: Pilkar on Mon, 15 April 2002 06:46
		Re: crossover design... help.... By: Wayne Parham on Mon, 15 April 2002 10:41
		Re: crossover design... help.... By: Pilkar on Mon, 15 April 2002 11:40
		did you mean the D205Ti driver? By: Sam P. on Mon, 15 April 2002 14:38
		Re: did you mean the D205Ti driver? By: Pilkar on Tue, 16 April 2002 05:11
		Re: crossover design... help.... By: Wayne Parham on Mon, 15 April 2002 15:00
		Re: crossover design... help.... By: Pilkar on Tue, 16 April 2002 04:51
		Re: crossover design... help.... By: Wayne Parham on Tue, 16 April 2002 09:34
		Re: crossover design... help.... By: Pilkar on Tue, 16 April 2002 11:42
		You have mail! By: Wayne Parham on Tue, 16 April 2002 14:54

Previous Topic:	Horn flare survey
Next Topic:	Folded horn subs--yuck!

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Wed May 08 15:56:09 CDT 2024