AudioRoundTable.com: Pi Speakers

Home » Sponsored » Pi Speakers » Dayton Crossover

Show: Today's Messages :: Navigator :: Polls
E-mail to friend

Dayton Crossover [message #35853]

Sun, 07 April 2002 10:17

KevinP
Messages: 12
Registered: May 2009

Chancellor

I thought I'd also point this fellow out. I havn't read through all your compression tweeter compensation notes but I thought these pose an interesting option.

PE# 260-160

Has the same 12db low pass & 18db high pass characteristics as the Eminence pxb with a built in L-Pad for the tweeter attenuation. I'd be inclined to replace the cheap pot with a fixed resistor once it was dialed in but might be a nice all in one solution.

Any comments Wayne?

Report message to a moderator

[Message index]

		Dayton Crossover By: KevinP on Sun, 07 April 2002 10:17
		hmm By: dbeardsl on Sun, 07 April 2002 14:08
		Compensation components require specific R1 and R2 instead of an L-Pad By: Wayne Parham on Sun, 07 April 2002 16:51
		Re: Compensation components require specific R1 and R2 instead of an L-Pad By: KevinP on Mon, 08 April 2002 18:30
		Active crossovers By: Wayne Parham on Mon, 08 April 2002 19:34

Previous Topic:	PSD2002 Horn
Next Topic:	Review of speakers?

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Mon Jul 15 02:29:25 CDT 2024