AudioRoundTable.com: Pi Speakers » minimum width of cabinet on Three Pi reflex

Home » Sponsored » Pi Speakers » minimum width of cabinet on Three Pi reflex

Show: Today's Messages :: Navigator :: Polls
E-mail to friend

minimum width of cabinet on Three Pi reflex [message #35766]

Tue, 02 April 2002 15:50

Hodel
Messages: 5
Registered: May 2009

Esquire

A reviewer said that in order to insure a good wavelaunch, the width of the front baffle had to be at least 19 inches. I am considering building the Three Pi reflex Thermionics with a front baffle width of 14 inches and increase the height to keep the same volume (any wider than 14 inches just doesn't work in my small family room). Can anyone provide any information as to problems with a 14 inch wide front baffle?

Report message to a moderator

[Message index]

		minimum width of cabinet on Three Pi reflex By: Hodel on Tue, 02 April 2002 15:50
		two "walls" will be almost touching the driver By: Sam P. on Wed, 03 April 2002 05:55
		Re: two "walls" will be almost touching the driver By: Hodel on Wed, 03 April 2002 16:31
		effect of 'glass on box volume By: Sam P. on Thu, 04 April 2002 05:49
		Re: minimum width of cabinet on Three Pi reflex By: DavidW on Wed, 03 April 2002 17:16

Previous Topic:	Quick question
Next Topic:	Erik from Holland - do you play in band?

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Fri Nov 22 15:39:02 CST 2024