AudioRoundTable.com: Pi Speakers » jbl 2035's in quasi-pi

Home » Sponsored » Pi Speakers » jbl 2035's in quasi-pi

Show: Today's Messages :: Navigator :: Polls
E-mail to friend

Re: jbl 2035's in quasi-pi [message #34892 is a reply to message #34884]

Fri, 25 January 2002 21:05

Robert Hamel
Messages: 93
Registered: May 2009

Viscount

The T/S are in the JBL document. If you run the 2 drivers in WIN ISD they are very close. The 2226 has better low end extension. The impedance curve is much flater than the 2226. Take a look at the spec sheets for the 4638 and 4648.

Report message to a moderator

[Message index]

		jbl 2035's in quasi-pi By: Sam P. on Fri, 25 January 2002 13:07
		PiAlign'ed 2035's By: Wayne Parham on Fri, 25 January 2002 15:49
		JBL T/S Specs By: LuxmanLover on Fri, 25 January 2002 17:08
		Re: JBL T/S Specs By: Wayne Parham on Fri, 25 January 2002 21:21
		LOLOLOL By: LuxmanLover on Sat, 26 January 2002 05:18
		thanks wayne, printed your reply, By: Sam P. on Sat, 26 January 2002 10:53
		You have mail By: Wayne Parham on Sat, 26 January 2002 14:51
		wow, that was fast, By: Sam P. on Sat, 26 January 2002 15:14
		Compensation components By: Wayne Parham on Sat, 26 January 2002 15:35
		Re: jbl 2035's in quasi-pi By: Robert Hamel on Fri, 25 January 2002 21:05
		Re: jbl 2035's in quasi-pi By: tom clark on Sat, 26 January 2002 08:20
		Re: jbl 2035's in quasi-pi By: Robert Hamel on Sun, 27 January 2002 07:45

Previous Topic:	Is it true you can damage your hearing if ya exposed to over 90 db
Next Topic:	Theatre 4 Woofer RC network: I just removed it.

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Tue May 14 04:21:54 CDT 2024