AudioRoundTable.com: Pi Speakers » Pictures of my Thermionic four Pi's

Home » Sponsored » Pi Speakers » Pictures of my Thermionic four Pi's

Show: Today's Messages :: Navigator :: Polls
E-mail to friend

Pictures of my Thermionic four Pi's [message #33985]

Mon, 01 October 2001 14:00

Mike Borzcik
Messages: 14
Registered: May 2009

Chancellor

Here are some pictures of my Thermionic four Pi's. Sorry about the poor image quality, but at least you can sort of tell what they look like. The second picture is the crossover--the components are mounted directly to the inside of the rear panel using PL400 subfloor adhesive. Total cost for the speakers was a little over $500 for the pair, including about 50 pounds of metal hardware for aesthetic purposes. My friend managed to get me all the 1" MDF for free from a scrap box, so I probably could have build a bare-bones pair of four Pi's for less than $400, but I decided to use the money I saved to make them look really sexy. :-)

Let me know if you have any questions about how I built them, the components I used, or how the heck I managed to get the beasts into a dorm room. :-)

Mike Borzcik

Report message to a moderator

[Message index]

		Pictures of my Thermionic four Pi's By: Mike Borzcik on Mon, 01 October 2001 14:00
		Re: Pictures of my Thermionic four Pi's By: replay on Mon, 01 October 2001 15:30
		Re: Pictures of my Thermionic four Pi's By: Mike Borzcik on Mon, 01 October 2001 17:12
		Super cool! By: Wayne Parham on Mon, 01 October 2001 20:12
		Yes , very cool indeed! By: James W. Johnson on Tue, 02 October 2001 18:05
		Re: Pictures of my Thermionic four Pi's By: replay on Tue, 02 October 2001 07:34

Previous Topic:	Crossover document - third draft
Next Topic:	Gamma Pi-align PA box and some other pics

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Mon Nov 11 08:53:29 CST 2024