AudioRoundTable.com: Group Build » Choke cpaazitance, round 2

Home » Audio » Group Build » Choke cpaazitance, round 2

Show: Today's Messages :: Navigator :: Polls
E-mail to friend

Re: Choke capazitance, round 2 [message #31857 is a reply to message #31855]

Wed, 29 March 2006 10:08

PakProtector
Messages: 935
Registered: May 2009

Illuminati (2nd Degree)

Hy-Hy!!!,
I think it is time to measure tha amp again. It has gotten a bit on the heavy side...but that may have improved its power delivery.

The E-Linear plate-to-grid NFB will do a bit to level the response. The 20-20 lineage of the output TX should grant it full power down to its advertised low frequency limit...:)

I will measure it soon. Must get proper load that won't overheat.
cheers,
Douglas

Report message to a moderator

[Message index]

		Choke cpaazitance, round 2 By: PakProtector on Tue, 28 March 2006 04:41
		Re: Choke capazitance, round 2 By: Damir on Tue, 28 March 2006 05:42
		Re: Choke capazitance, round 2 By: Wayne Parham on Tue, 28 March 2006 09:37
		Re: Choke capazitance, round 2 By: Damir on Tue, 28 March 2006 10:16
		Re: Choke capazitance, round 2 By: Wayne Parham on Tue, 28 March 2006 10:59
		Re: Choke capazitance, round 2 By: PakProtector on Tue, 28 March 2006 14:06
		Re: Choke capazitance, round 2 By: Damir on Wed, 29 March 2006 05:01
		Re: Choke capazitance, round 2 By: PakProtector on Wed, 29 March 2006 10:08
		round 3....heh-heh-heh By: PakProtector on Tue, 28 March 2006 18:06

Previous Topic:	Measuring Z impedance
Next Topic:	AE transformers and chokes for 300B project

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Wed May 15 21:53:51 CDT 2024