AudioRoundTable.com: Group Build » Resistor choices for SV811 project

Home » Audio » Group Build » Resistor choices for SV811 project

Show: Today's Messages :: Navigator :: Polls
E-mail to friend

Resistor choices for SV811 project [message #31567]

Tue, 06 December 2005 08:16

colinhester
Messages: 1349
Registered: May 2009
Location: NE Arkansas

Illuminati (3rd Degree)

Well, I think I have everything I need to start building, except for resistors. Come on guys, help me decide what to get. Will Kiwame brand (2W, carbon film) be acceptable for all of them. I will replace the volume control with a 100k resistor from grid to ground.

Also, will 470k 2W Kiwame resistors be sufficient for bleeders on the power supply oil caps (10, 40 and 50uF.) Should there be bleeders across the 56,000uF 16V caps as well? If so, what value would suffice?

Thanks, Colin

http://www.audioroundtable.com/GroupBuild/Projects/SV811_10.gif

Report message to a moderator

[Message index]

		Resistor choices for SV811 project By: colinhester on Tue, 06 December 2005 08:16
		Re: Resistor choices for SV811 project By: Damir on Tue, 06 December 2005 12:16
		Re: Resistor choices for SV811 project By: Norris Wilson on Tue, 06 December 2005 15:05
		Thanks By: colinhester on Wed, 07 December 2005 10:58
		Re: Resistor choices for SV811 project By: PakProtector on Tue, 06 December 2005 15:59
		Re: Resistor choices for SV811 project By: 2wo on Tue, 06 December 2005 16:21
		Re: Resistor choices for SV811 project By: Damir on Wed, 07 December 2005 06:21
		Warning, Will Robinson By: colinhester on Wed, 07 December 2005 11:01
		Damir is right as usual By: 2wo on Wed, 07 December 2005 22:06
		Bleeders By: colinhester on Wed, 07 December 2005 11:09

Previous Topic:	The shunt capacitance of grid and anode chokes
Next Topic:	C-Core grid chokes

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Sun Apr 28 00:28:15 CDT 2024