AudioRoundTable.com: Group Build

Home » Audio » Group Build » Troubleshooting

Show: Today's Messages :: Navigator :: Polls
E-mail to friend

Troubleshooting [message #30884]

Tue, 08 March 2005 16:52

Manualblock
Messages: 4973
Registered: May 2009

Illuminati (13th Degree)

Well; here we go. Seems I am blowing fuses upon switching my unit on. I have gone over the trans and PS wireing and it all checks out and looks good. Can a shorted lead on the CCS cause a fuse out on power up?
The tranny is Blue/Red secondaries to the anodes of the 6CA4(250V)
Red/Yellow to chassis ground
Yellow 5v secondaries to the Filament heater pins of the rec tube
Cathode to the choke
Choke to PS cap +

The two primary black wires/ one to the AC input and the other to the switch
Then from the switch to the fuse to the AC input neutral return

Report message to a moderator

[Message index]

		Troubleshooting By: Manualblock on Tue, 08 March 2005 16:52
		What fuse are you using? By: colinhester on Tue, 08 March 2005 17:10
		first to the fuse... By: PakProtector on Tue, 08 March 2005 18:13
		one more thing... By: PakProtector on Tue, 08 March 2005 18:18
		Rectifier heater voltage By: colinhester on Wed, 09 March 2005 12:23
		Chassis ground? By: colinhester on Wed, 09 March 2005 11:13

Previous Topic:	Guinevere wired and ready.
Next Topic:	Ground isolated from chassis - now it's an AM radio

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Sun May 05 05:37:39 CDT 2024