AudioRoundTable.com: Group Build » Guinevere wired and ready.

Home » Audio » Group Build » Guinevere wired and ready.

Show: Today's Messages :: Navigator :: Polls
E-mail to friend

Guinevere wired and ready. [message #30878]

Mon, 07 March 2005 18:29

Manualblock
Messages: 4973
Registered: May 2009

Illuminati (13th Degree)

Well; all the wires are soldered and dressed. I will not power up until tommorrow. I need to check all leads and joints and want to start fresh. I think the only possible problem may lie in those SS things. I mounted the LED's on a seperate strip with it's own ground. The heater supplies work on both tubes and I am pretty confidant of the PS. Time will tell.
I am going to use one of the gainclones to test at first just in case!
If there are no problems you will hear from me. If you don't hear from me send mass cards to Our Lady Of Lourdes.

Report message to a moderator

[Message index]

		Guinevere wired and ready. By: Manualblock on Mon, 07 March 2005 18:29
		Come on. Plug it in already. By: colinhester on Mon, 07 March 2005 19:35
		Re: Come on. Plug it in already. By: Wayne Parham on Mon, 07 March 2005 21:23
		Re: Come on. Plug it in already. By: Manualblock on Tue, 08 March 2005 06:14
		"Warning Will Robinson!" By: Wayne Parham on Tue, 08 March 2005 07:46
		Re: "Warning Will Robinson!" By: Manualblock on Tue, 08 March 2005 08:26

Previous Topic:	Location of Selector Switch in Preamp
Next Topic:	Troubleshooting

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Sat Apr 27 15:29:46 CDT 2024