AudioRoundTable.com: Group Build » Mounting Coupling caps

Home » Audio » Group Build » Mounting Coupling caps

Show: Today's Messages :: Navigator :: Polls
E-mail to friend

Cap polarity [message #30791 is a reply to message #30790]

Wed, 02 March 2005 19:11

colinhester
Messages: 1349
Registered: May 2009
Location: NE Arkansas

Illuminati (3rd Degree)

For the heater, the negative end of the first cap is attached to the CT adn the second cap's negative is wired directly to the first negative. The resistors are wired in series to the positive side. If you did not catch my earlier post the 5 ohm should be 2 ohn and the 3 ohm should be 2 as well.....Colin

http://audioroundtable.com/GroupBuild/messages/397.html

Report message to a moderator

[Message index]

		Mounting Coupling caps By: Manualblock on Wed, 02 March 2005 12:25
		Re: Mounting Coupling caps By: Thrint on Wed, 02 March 2005 15:14
		Re: Mounting Coupling caps By: Manualblock on Wed, 02 March 2005 16:41
		Re: Mounting Coupling caps By: Thrint on Wed, 02 March 2005 17:51
		Re: Mounting Coupling caps By: Manualblock on Wed, 02 March 2005 18:54
		Cap polarity By: colinhester on Wed, 02 March 2005 19:11
		Re: Cap polarity By: Manualblock on Wed, 02 March 2005 19:34
		Re: Cap polarity By: Thrint on Wed, 02 March 2005 20:06
		Re: Cap polarity By: Manualblock on Wed, 02 March 2005 20:12
		No problem By: PakProtector on Thu, 03 March 2005 15:02

Previous Topic:	Guinevere LIVES
Next Topic:	Filament Caps

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Mon May 13 13:54:42 CDT 2024