AudioRoundTable.com: Group Build » Going to build Gunevere with you guys...

Home » Audio » Group Build » Going to build Gunevere with you guys...

Show: Today's Messages :: Navigator :: Polls
E-mail to friend

Going to build Gunevere with you guys... [message #30630]

Sun, 20 February 2005 12:58

PakProtector
Messages: 935
Registered: May 2009

Illuminati (2nd Degree)

slight changes to accomodate what I have on hand. Hammond 261G6 with a hybrid SS/valve rectifier( still a 6CA4). Amplifier valves are 12B4's 'cause I don't need the gain and I already have two holes in the chassis from when it was the Foreplay Imposter built with 5687's.

L-C supply with the big cap and a 157G Hammond. Chassis is only 5 3/4 by 11. space is at a premium. I hope I can cram it all in.
regards,
Douglas

Report message to a moderator

[Message index]

		Going to build Gunevere with you guys... By: PakProtector on Sun, 20 February 2005 12:58
		Photographic report, then?:-) /nt/ By: Damir on Mon, 21 February 2005 15:45
		but of course... By: PakProtector on Mon, 21 February 2005 16:34
		Re: but of course... By: Manualblock on Mon, 21 February 2005 17:09
		Eiclones? By: PakProtector on Mon, 21 February 2005 17:58
		Re: Eiclones? By: Manualblock on Tue, 22 February 2005 05:56
		Re: Eiclones? By: PakProtector on Tue, 22 February 2005 07:25
		Re: Eiclones? By: Manualblock on Tue, 22 February 2005 10:15
		changes By: PakProtector on Tue, 22 February 2005 19:56
		Re: changes By: Manualblock on Wed, 23 February 2005 06:48
		Re: changes By: PakProtector on Wed, 23 February 2005 06:58
		Re: changes By: Manualblock on Wed, 23 February 2005 10:22
		acquisitions By: PakProtector on Wed, 23 February 2005 13:37
		Re: acquisitions By: Manualblock on Wed, 23 February 2005 15:33

Previous Topic:	supplier dealings
Next Topic:	Tertiary winding OPTx windings

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Sun Apr 28 20:03:52 CDT 2024