AudioRoundTable.com: Group Build

Home » Audio » Group Build » Capacitors

Show: Today's Messages :: Navigator :: Polls
E-mail to friend

LED's [message #30556 is a reply to message #30554]

Tue, 15 February 2005 16:40

PakProtector
Messages: 935
Registered: May 2009

Illuminati (2nd Degree)

I take a strip of vector board about 5 holes wide and a few inches long for mounting them. Put them in series, and join the proper end to ground and put the other on the cathodes.

Please refer to Damir's drawing, I have to look closely at a built up one before I solder a new string together. It is basically long leg to short, but I can't remember if the long or the short goes to the cathode( and the other to ground ).
regards,
Douglas

Report message to a moderator

[Message index]

		Capacitors By: Manualblock on Mon, 14 February 2005 16:13
		Re: Capacitors By: colinhester on Mon, 14 February 2005 16:56
		Re: Capacitors By: Manualblock on Mon, 14 February 2005 17:33
		Re: Capacitors By: colinhester on Mon, 14 February 2005 17:44
		Re: Capacitors By: Manualblock on Tue, 15 February 2005 06:30
		Re: Capacitors By: PakProtector on Tue, 15 February 2005 07:26
		Re: Capacitors By: Manualblock on Tue, 15 February 2005 15:37
		LED's By: PakProtector on Tue, 15 February 2005 16:40
		Re: LED's By: Wayne Parham on Tue, 15 February 2005 22:38
		Re: Capacitors By: Wayne Parham on Tue, 15 February 2005 22:40
		two words... By: PakProtector on Wed, 16 February 2005 05:49
		but... By: PakProtector on Wed, 16 February 2005 05:52
		"Valve Amplifiers 3" - again :-) By: Damir on Wed, 16 February 2005 06:26
		"Valve Amplifiers 3" By: PakProtector on Wed, 16 February 2005 06:43

Previous Topic:	PCB for the CCS
Next Topic:	Silver Lining

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Sun May 12 20:36:19 CDT 2024