AudioRoundTable.com: Group Build

Home » Audio » Group Build » Capacitors

Show: Today's Messages :: Navigator :: Polls
E-mail to friend

Re: Capacitors [message #30542 is a reply to message #30540]

Tue, 15 February 2005 07:26

PakProtector
Messages: 935
Registered: May 2009

Illuminati (2nd Degree)

Hey-Hey!!!,
ON the peanut tubes, the 5687 is the same size as an AU7/AT7/AX7 ( heh-heh-heh...).

There is one more thing y'all may want to do. Prepare for adding a second 9-pin socket so that you can run the 12B4 with its lower gain.

The mods are simple: 6 LED's instead of two.

and of course the second socket. Heater current for two at 12.6 is .6A instead of .45 for the 5687. Minor tweaks of the supply *MIGHT* be required if you want to hit the heater voltage +/- 1%
regards,
Douglas

Report message to a moderator

[Message index]

		Capacitors By: Manualblock on Mon, 14 February 2005 16:13
		Re: Capacitors By: colinhester on Mon, 14 February 2005 16:56
		Re: Capacitors By: Manualblock on Mon, 14 February 2005 17:33
		Re: Capacitors By: colinhester on Mon, 14 February 2005 17:44
		Re: Capacitors By: Manualblock on Tue, 15 February 2005 06:30
		Re: Capacitors By: PakProtector on Tue, 15 February 2005 07:26
		Re: Capacitors By: Manualblock on Tue, 15 February 2005 15:37
		LED's By: PakProtector on Tue, 15 February 2005 16:40
		Re: LED's By: Wayne Parham on Tue, 15 February 2005 22:38
		Re: Capacitors By: Wayne Parham on Tue, 15 February 2005 22:40
		two words... By: PakProtector on Wed, 16 February 2005 05:49
		but... By: PakProtector on Wed, 16 February 2005 05:52
		"Valve Amplifiers 3" - again :-) By: Damir on Wed, 16 February 2005 06:26
		"Valve Amplifiers 3" By: PakProtector on Wed, 16 February 2005 06:43

Previous Topic:	PCB for the CCS
Next Topic:	Silver Lining

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Mon May 13 05:17:24 CDT 2024