AudioRoundTable.com: Craftsmen » An uncraftsman question-- Cabinet grade plywood

Home » Audio » Craftsmen » An uncraftsman question-- Cabinet grade plywood

Show: Today's Messages :: Navigator :: Polls
E-mail to friend

Re: An uncraftsman question-- Cabinet grade plywood [message #29807 is a reply to message #29805]

Sun, 15 October 2006 17:21

Bill Epstein
Messages: 1088
Registered: May 2009
Location: Smoky Mts. USA

Illuminati (2nd Degree)

Yeah, we've had that off and on for a few years @ $25-$30. It's Chinese, the quality of the grain varies but the construction is first rate. I've used a lot of it.

If you really want a good deal, look for the top or bottom piece in the bunk which will always have indentations from the banding. Ask for a $10 (at least) discount. And if you see delamination on the edges, cut well away from it. That is it's weakness.

Report message to a moderator

[Message index]

		An uncraftsman question-- Cabinet grade plywood By: lon on Sun, 15 October 2006 11:58
		Re: An uncraftsman question-- Cabinet grade plywood By: Bill Epstein on Sun, 15 October 2006 17:21
		Re: An uncraftsman question-- Cabinet grade plywood By: lon on Sun, 15 October 2006 20:13
		Re: An uncraftsman question-- Cabinet grade plywood By: gfederys on Mon, 16 October 2006 13:45
		Re: An uncraftsman question-- Cabinet grade plywood By: Bill Epstein on Mon, 16 October 2006 19:33
		Re: An uncraftsman question-- Cabinet grade plywood By: gfederys on Tue, 17 October 2006 06:36
		Re: An uncraftsman question-- Cabinet grade plywood By: lon on Tue, 17 October 2006 10:37
		Re: An uncraftsman question-- Cabinet grade plywood By: gfederys on Tue, 17 October 2006 12:08

Previous Topic:	"Whatever the question: Tri-Flow is the answer."
Next Topic:	Filler for mitered edges that aren't flush?

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Sun May 19 05:08:03 CDT 2024