Home » Audio » Craftsmen » Finish for Purpleheart
Re: Finish for Purpleheart [message #29716 is a reply to message #29714] Tue, 10 January 2006 16:12 Go to previous messageGo to previous message
GarMan is currently offline  GarMan
Messages: 960
Registered: May 2009
Illuminati (2nd Degree)
Most lumber yards will dress lumber (plane and joint) at $50-$60/hr, with mininum charge in place. Price can be higher if you didn't buy the wood from them. There may be a surcharge for your purpleheart if they consider it an "abrasive" material. Purpleheart is great at dulling blades. Should take less than 1/2 hour to dress your two planks, but consider the up-charges.

If you have the muscle, you can dress the planks by hand with a scrub plane, #4 smoothing plane, and #6 or 7 jointer plane.

Do some research before deciding on a finish. Purpleheart can take a colour from magenta-red to purple to greyish brown, depending on finish and exposure to light/air. Start with the link below.

gar.


 
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Previous Topic: Bonding metal to wood
Next Topic: soapstone
Goto Forum:
  


Current Time: Tue May 21 02:00:56 CDT 2024

Sponsoring Organizations

DIY Audio Projects
DIY Audio Projects
OddWatt Audio
OddWatt Audio
Pi Speakers
Pi Speakers
Prosound Shootout
Prosound Shootout
Smith & Larson Audio
Smith & Larson Audio
Tubes For Amps
TubesForAmps.com

Lone Star Audiofest