AudioRoundTable.com: Craftsmen » How Thick is Thick Enough?

Home » Audio » Craftsmen » How Thick is Thick Enough?

Show: Today's Messages :: Navigator :: Polls
E-mail to friend

Re: How Thick is Thick Enough? [message #29131 is a reply to message #29129]

Tue, 29 June 2004 12:37

elektratig
Messages: 348
Registered: May 2009

Grand Master

I can imagine what you mean about the weight of your 2 Pi towers w/ 1" MDF. I recently completed a pair using basically the same technique I used for the subs -- 3/4" MDF, well braced, doubled on the front baffle. Even though they presumably weighed less than yours, it took two of us to drag them up from the garage, and we just barely made it.

2 Pi Tower Construction Pix

Report message to a moderator

[Message index]

		How Thick is Thick Enough? By: GarMan on Mon, 28 June 2004 14:58
		Re: How Thick is Thick Enough? By: elektratig on Tue, 29 June 2004 04:42
		Re: How Thick is Thick Enough? By: GarMan on Tue, 29 June 2004 07:22
		Re: How Thick is Thick Enough? By: elektratig on Tue, 29 June 2004 12:37
		One half inch. By: Bill Fitzmaurice on Tue, 29 June 2004 14:30
		Re: One half inch. By: GarMan on Tue, 29 June 2004 15:14
		Re: One half inch. By: Bill Fitzmaurice on Tue, 29 June 2004 21:01
		Re: One half inch. By: Bill Martinelli on Wed, 30 June 2004 22:54

Previous Topic:	So you want to move the volume pot to the rear?
Next Topic:	Modular Speakers

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Thu May 16 07:55:53 CDT 2024