AudioRoundTable.com: Craftsmen » How Thick is Thick Enough?

Home » Audio » Craftsmen » How Thick is Thick Enough?

Show: Today's Messages :: Navigator :: Polls
E-mail to friend

How Thick is Thick Enough? [message #29126]

Mon, 28 June 2004 14:58

GarMan
Messages: 960
Registered: May 2009

Illuminati (2nd Degree)

Hi Everyone. I want to get some feedback on what's considered acceptable stock for a 5 cubic foot box (20x20x20). I used 1" MDF for the 2PI Towers last year and think that was overkill. However, I've seen guys double up on 3/4" MDF for all six sides for a total of 1.5". I'm looking to build the box for a JBL 2235 and running it down to 35Hz.

Will 3/4" MFD be fine?
If given a choice between thick walls with little bracing, or thinner walls with more agressive bracing, which would be better?

thanks,
Gar.

Report message to a moderator

[Message index]

		How Thick is Thick Enough? By: GarMan on Mon, 28 June 2004 14:58
		Re: How Thick is Thick Enough? By: elektratig on Tue, 29 June 2004 04:42
		Re: How Thick is Thick Enough? By: GarMan on Tue, 29 June 2004 07:22
		Re: How Thick is Thick Enough? By: elektratig on Tue, 29 June 2004 12:37
		One half inch. By: Bill Fitzmaurice on Tue, 29 June 2004 14:30
		Re: One half inch. By: GarMan on Tue, 29 June 2004 15:14
		Re: One half inch. By: Bill Fitzmaurice on Tue, 29 June 2004 21:01
		Re: One half inch. By: Bill Martinelli on Wed, 30 June 2004 22:54

Previous Topic:	So you want to move the volume pot to the rear?
Next Topic:	Modular Speakers

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Thu Nov 21 13:47:17 CST 2024