AudioRoundTable.com: Craftsmen » White Ash Finishing Suggestions Wanted

Home » Audio » Craftsmen » White Ash Finishing Suggestions Wanted

Show: Today's Messages :: Navigator :: Polls
E-mail to friend

Re: White Ash Finishing Suggestions Wanted [message #29053 is a reply to message #29052]

Tue, 20 April 2004 20:11

Bill Martinelli
Messages: 677
Registered: May 2009

Illuminati (1st Degree)

Tung oil is great finish. It will give you some of the best grain definition and its not a difficult finish to use. An oil base stain will help to highlight and bring out some grain. There are a few lighter ones that will help keep your contrast, but all will start to darken the ash a little. Shellac is also a good finish and my favorite is Varnish.

Report message to a moderator

[Message index]

		White Ash Finishing Suggestions Wanted By: elektratig on Tue, 20 April 2004 17:14
		Re: White Ash Finishing Suggestions Wanted By: Bill Martinelli on Tue, 20 April 2004 20:11
		Re: Spraying varnish By: BillEpstein on Tue, 20 April 2004 21:20
		Re: Spraying varnish By: Bill Martinelli on Tue, 20 April 2004 21:43
		Re: Oops- Tried and True is Linseed By: BillEpstein on Wed, 21 April 2004 05:51
		To fill or not to fill- that is the question. By: Bill Fitzmaurice on Thu, 22 April 2004 05:54
		Thanks! By: elektratig on Fri, 23 April 2004 07:55

Previous Topic:	Need to know how to fill gap
Next Topic:	Two-Tone Outer Front Baffles

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Sat May 11 13:16:15 CDT 2024