AudioRoundTable.com: Radio » Zenith 9-S-262

Home » Audio » Radio » Zenith 9-S-262

Show: Today's Messages :: Navigator :: Polls
E-mail to friend

Zenith 9-S-262 [message #25897]

Fri, 03 November 2006 08:26

lyckland
Messages: 1
Registered: May 2009

Esquire

I'm in the process of restoring a Zenith console that was my grandparents. It hasn't run since the mid 50's so I have replaced all of the cacacitors, both wax and electrolytic, with new units. Last night I plugged in the set and all I got was a very low hum when I placed my ear up to the speaker. It made no difference if I moved the volume control. The hum is barely audible. All tubes glowed, some brighter than others. Is there a step-by-step process that I should follow to diagnose the problem? I have a basic understanding of electronics and can read a schematic but that's about it.

any help is appreciated.

Tom

Report message to a moderator

[Message index]

		Zenith 9-S-262 By: lyckland on Fri, 03 November 2006 08:26
		Re: Zenith 9-S-262 By: Tim on Tue, 07 November 2006 03:07
		Re: Zenith 9-S-262 By: Lee gathers on Fri, 22 December 2006 21:08
		Re: Zenith 9-S-262 By: Wayne Parham on Sat, 30 December 2006 11:21
		Re: Zenith 9-S-262 By: Lee gathers on Sat, 03 February 2007 21:11
		Re: Zenith 9-S-262 By: Wayne Parham on Sun, 04 February 2007 13:41
		Re: Zenith 9-S-262 By: Lee gathers on Mon, 05 February 2007 20:06
		Re: Zenith 9-S-262 By: Wayne Parham on Tue, 06 February 2007 00:02

Previous Topic:	ward aline radios
Next Topic:	airline radio

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Fri Nov 22 01:26:42 CST 2024