| Two PI depth adjustment [message #97811] |
Sun, 30 June 2024 13:54  |
Tronographic
Messages: 9
Registered: March 2021
|
Esquire |
|
|
Hey Gang!
So I'm about to glue up the outer panels of my Two-PIs I'm building... And then I see on the blueprints that "all panels are 5/8" Stock ...
Rut Roh!
I used 3/4" Baltic Birch.
The 15x22 dimensions are set at this point as my rabbets are all cut...But luckily I haven't trimmed the depth dimension yet... the panels are still about 11-7/8" deep.
What depth do I make the cabs to compensate for the panel thickness difference?
Also I will be using 5/8" poplar cleats around the inside front and back to glue in the baffles. Do I need to compensate displacement for this as well?
Also, what online speaker box volume calculators are you guys using these days?
Thanks!
|
|
|
|
Posting Rules
Members
Search
Help
Register
Login
Get a T-Shirt!
