AudioRoundTable.com: Pi Speakers » 4-pi "clone", active

Home » Sponsored » Pi Speakers » 4-pi "clone", active - am I on the right track?

Show: Today's Messages :: Navigator :: Polls
E-mail to friend

4-pi "clone", active - am I on the right track? [message #96841]

Sat, 08 July 2023 16:46

mathiasb
Messages: 7
Registered: December 2019
Location: WA

Esquire

Hello,

I built a set of four Pi "clones", similar build but a tad smaller and no horizontal offset for the tweeter. I am trying to understand / learn along this process so my current crossover is probably far from ideal. I am using a MiniDSP device.

Any idea how I should set the crossovers and time alignment? Many thanks in advance.

/forum/index.php?t=getfile&id=3337&private=0

/forum/index.php?t=getfile&id=3338&private=0

/forum/index.php?t=getfile&id=3339&private=0

Attachment: JBL speaker 1.png
(Size: 2.21MB, Downloaded 376 times)
Attachment: JBL speaker 2.png
(Size: 2.42MB, Downloaded 363 times)
Attachment: JBL speaker 3.png
(Size: 2.49MB, Downloaded 353 times)

Report message to a moderator

[Message index]

		4-pi "clone", active - am I on the right track? By: mathiasb on Sat, 08 July 2023 16:46
		Re: 4-pi "clone", active - am I on the right track? By: Wayne Parham on Sun, 09 July 2023 10:01

Previous Topic:	What's included in the One and Two Kits
Next Topic:	speaker plans 4 pi

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Thu Nov 21 10:26:39 CST 2024