AudioRoundTable.com: Speaker » Combo B&C DE250 with Altec 811

Home » Audio » Speaker » Combo B&C DE250 with Altec 811 (cross over design around 800 Hz / 1 Khz )

Show: Today's Messages :: Navigator :: Polls
E-mail to friend

Re: Combo B&C DE250 with Altec 811 [message #95120 is a reply to message #95119]

Mon, 24 January 2022 14:54

OutOfSpace
Messages: 19
Registered: June 2017

Chancellor

Arthur,

One important detail; the B&C DE250 isn't intended to be used down to 800Hz.
Altec drivers would be one option if that x-over frequency is required for your
chosen woofers. Another would be to build a 7-Pi type design with the 811's
and the Pi midhorn. That arrangement was very satisfying for me, although
I've since built proper 7-Pi's with Wayne's horn and crossover instead.

Chris

Report message to a moderator

[Message index]

		Combo B&C DE250 with Altec 811 By: Arthur C on Thu, 20 January 2022 13:29
		Re: Combo B&C DE250 with Altec 811 By: Wayne Parham on Thu, 20 January 2022 17:02
		Re: Combo B&C DE250 with Altec 811 By: Arthur C on Fri, 21 January 2022 07:36
		Re: Combo B&C DE250 with Altec 811 By: Wayne Parham on Fri, 21 January 2022 09:14
		Re: Combo B&C DE250 with Altec 811 By: Arthur C on Mon, 24 January 2022 12:23
		Re: Combo B&C DE250 with Altec 811 By: OutOfSpace on Mon, 24 January 2022 14:54
		Re: Combo B&C DE250 with Altec 811 By: Arthur C on Tue, 22 February 2022 08:21
		Re: Combo B&C DE250 with Altec 811 By: Wayne Parham on Tue, 22 February 2022 09:24

Previous Topic:	2 pi's
Next Topic:	Ideas for large shop

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Sun May 05 12:29:22 CDT 2024