AudioRoundTable.com: Speaker » Combo B&C DE250 with Altec 811

Home » Audio » Speaker » Combo B&C DE250 with Altec 811 (cross over design around 800 Hz / 1 Khz )

Show: Today's Messages :: Navigator :: Polls
E-mail to friend

Re: Combo B&C DE250 with Altec 811 [message #95119 is a reply to message #95100]

Mon, 24 January 2022 12:23

Arthur C
Messages: 13
Registered: November 2011
Location: Paris, FRANCE

Chancellor

Wayne,

Many thanks for your feedback and clarification.
I have built a 4Pi Speaker which works very well. A very nice speaker.
My new project with a 15' carbon fiber woofer is not really suitable for a frequency cut off too high.
I will review my crossover concerning the Altec 811.
I have seen a nice horn (very cheap) that should be nice also.

https://sono.e44.com/sonorisation/haut-parleurs/haut-parleurs-autres-marques/pavillon-abs-moteur-sono-465-245mm-MHD5P.html

Many tanks for our help.
Best regards.
Arthur.

Report message to a moderator

[Message index]

		Combo B&C DE250 with Altec 811 By: Arthur C on Thu, 20 January 2022 13:29
		Re: Combo B&C DE250 with Altec 811 By: Wayne Parham on Thu, 20 January 2022 17:02
		Re: Combo B&C DE250 with Altec 811 By: Arthur C on Fri, 21 January 2022 07:36
		Re: Combo B&C DE250 with Altec 811 By: Wayne Parham on Fri, 21 January 2022 09:14
		Re: Combo B&C DE250 with Altec 811 By: Arthur C on Mon, 24 January 2022 12:23
		Re: Combo B&C DE250 with Altec 811 By: OutOfSpace on Mon, 24 January 2022 14:54
		Re: Combo B&C DE250 with Altec 811 By: Arthur C on Tue, 22 February 2022 08:21
		Re: Combo B&C DE250 with Altec 811 By: Wayne Parham on Tue, 22 February 2022 09:24

Previous Topic:	2 pi's
Next Topic:	Ideas for large shop

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Sun May 05 10:20:43 CDT 2024