AudioRoundTable.com: Pi Speakers » 4Pi - alternate compression driver mounting?

Home » Sponsored » Pi Speakers » 4Pi - alternate compression driver mounting?

Show: Today's Messages :: Navigator :: Polls
E-mail to friend

Re: 4Pi - alternate compression driver mounting? [message #95159 is a reply to message #95157]

Mon, 31 January 2022 15:00

Wayne Parham
Messages: 18686
Registered: January 2001

Illuminati (33rd Degree)

I would strongly suggest adding insulation first. Especially the cross-section sheet. Try it straight. Try it diagonal. Make sure you can mitigate that peak at 120Hz.

I say this because you might find that your efforts to damp the peak are illusive, and you might end up moving the port. This is best learned while you're still in the "cut and try" mode.

Report message to a moderator

[Message index]

		4Pi - alternate compression driver mounting? By: areohbe on Tue, 21 September 2021 13:16
		Re: 4Pi - alternate compression driver mounting? By: Wayne Parham on Wed, 22 September 2021 08:57
		Re: 4Pi - alternate compression driver mounting? By: alexg on Wed, 10 November 2021 11:35
		Re: 4Pi - alternate compression driver mounting? By: Wayne Parham on Wed, 10 November 2021 16:25
		Re: 4Pi - alternate compression driver mounting? By: alexg on Sat, 13 November 2021 11:03
		Re: 4Pi - alternate compression driver mounting? By: areohbe on Sun, 14 November 2021 00:23
		Re: 4Pi - alternate compression driver mounting? By: areohbe on Mon, 29 November 2021 12:03
		Re: 4Pi - alternate compression driver mounting? By: areohbe on Wed, 22 September 2021 13:11
		Re: 4Pi - alternate compression driver mounting? By: Wayne Parham on Wed, 22 September 2021 14:53
		Re: 4Pi - alternate compression driver mounting? By: areohbe on Wed, 22 September 2021 22:53
		Re: 4Pi - alternate compression driver mounting? By: areohbe on Thu, 23 September 2021 02:03
		Re: 4Pi - alternate compression driver mounting? By: Wayne Parham on Thu, 23 September 2021 07:59
		Re: 4Pi - alternate compression driver mounting? By: areohbe on Sun, 02 January 2022 20:31
		Re: 4Pi - alternate compression driver mounting? By: Wayne Parham on Mon, 03 January 2022 09:40
		Re: 4Pi - alternate compression driver mounting? By: areohbe on Tue, 11 January 2022 21:17
		Re: 4Pi - alternate compression driver mounting? By: areohbe on Fri, 14 January 2022 18:25
		Re: 4Pi - alternate compression driver mounting? By: areohbe on Sat, 15 January 2022 20:36
		Re: 4Pi - alternate compression driver mounting? By: Wayne Parham on Sun, 16 January 2022 10:56
		Re: 4Pi - alternate compression driver mounting? By: areohbe on Thu, 27 January 2022 22:21
		Re: 4Pi - alternate compression driver mounting? By: Wayne Parham on Fri, 28 January 2022 12:13
		Re: 4Pi - alternate compression driver mounting? By: areohbe on Fri, 28 January 2022 17:38
		Re: 4Pi - alternate compression driver mounting? By: Wayne Parham on Sat, 29 January 2022 10:41
		Re: 4Pi - alternate compression driver mounting? By: areohbe on Sat, 29 January 2022 20:33
		Re: 4Pi - alternate compression driver mounting? By: areohbe on Mon, 31 January 2022 01:43
		Re: 4Pi - alternate compression driver mounting? By: Wayne Parham on Mon, 31 January 2022 09:21
		Re: 4Pi - alternate compression driver mounting? By: areohbe on Mon, 31 January 2022 14:08
		Re: 4Pi - alternate compression driver mounting? By: Wayne Parham on Mon, 31 January 2022 15:00
		Re: 4Pi - alternate compression driver mounting? By: areohbe on Mon, 31 January 2022 16:05
		Re: 4Pi - alternate compression driver mounting? By: areohbe on Fri, 04 February 2022 20:15
		Re: 4Pi - alternate compression driver mounting? By: Wayne Parham on Sat, 05 February 2022 10:43
		Re: 4Pi - alternate compression driver mounting? By: areohbe on Sun, 06 February 2022 20:07
		Re: 4Pi - alternate compression driver mounting? By: Wayne Parham on Mon, 07 February 2022 10:25
		Re: 4Pi - alternate compression driver mounting? By: areohbe on Fri, 06 May 2022 14:55
		Re: 4Pi - alternate compression driver mounting? By: Wayne Parham on Fri, 06 May 2022 15:23
		Re: 4Pi - alternate compression driver mounting? By: Barryso on Sat, 07 May 2022 08:26
		Re: 4Pi - alternate compression driver mounting? By: Rusty on Mon, 09 May 2022 05:58
		Re: 4Pi - alternate compression driver mounting? By: areohbe on Wed, 11 May 2022 15:11

Previous Topic:	room and amp questions
Next Topic:	MDO - Instead of Plywood

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Thu May 09 15:03:18 CDT 2024