AudioRoundTable.com: Pi Speakers

Home » Sponsored » Pi Speakers » 2Pi Tower Build (

) 1 Vote

Show: Today's Messages :: Navigator :: Polls
E-mail to friend

Re: 2Pi Tower Build [message #94645 is a reply to message #94643]

Thu, 21 October 2021 10:31

Wayne Parham
Messages: 18680
Registered: January 2001

Illuminati (33rd Degree)

Good suggestion, Rusty. No way to damage your speakers in a way that cuts through the "veneer." Nice!

As for the flush-mount routing groove, some people make the baffles double-thick when building speakers routed for flush mounting. But this makes them very heavy. I personally like making the baffle thicker only around the area of the driver, making no other changes. The way we do this is to cut circular panels and glue them to the inside of the baffle right behind the driver. Do this before routing and cutting the mounting holes. This makes the area around the drivers thicker, just enough for the mounting screws.

As an example, your midwoofers are 10" drivers, so cut a 12" diameter round panel from 3/4" material. Glue this where the midwoofer will mount, and then cut the routing groove and through-hole. That will leave you with a ring that's an inch wide or a little more around the through hole. It's thick in that area so mounting screws will have plenty of material to bite into.

Report message to a moderator

[Message index]

		2Pi Tower Build By: birkbott on Mon, 09 August 2021 08:39
		Re: 2Pi Tower Build By: Wayne Parham on Mon, 09 August 2021 11:11
		Re: 2Pi Tower Build By: birkbott on Mon, 09 August 2021 16:07
		Re: 2Pi Tower Build By: Wayne Parham on Mon, 09 August 2021 18:36
		Re: 2Pi Tower Build By: birkbott on Thu, 12 August 2021 21:11
		Re: 2Pi Tower Build By: Wayne Parham on Fri, 13 August 2021 08:12
		Re: 2Pi Tower Build By: birkbott on Wed, 20 October 2021 21:06
		Re: 2Pi Tower Build By: Rusty on Thu, 21 October 2021 10:00
		Re: 2Pi Tower Build By: Wayne Parham on Thu, 21 October 2021 10:31
		Re: 2Pi Tower Build By: grindstone on Thu, 21 October 2021 10:45
		Re: 2Pi Tower Build By: birkbott on Thu, 21 October 2021 11:58
		Re: 2Pi Tower Build By: birkbott on Fri, 22 October 2021 09:13
		Re: 2Pi Tower Build By: Wayne Parham on Fri, 22 October 2021 09:46
		Re: 2Pi Tower Build By: birkbott on Sat, 23 October 2021 12:02
		Re: 2Pi Tower Build By: Wayne Parham on Sat, 23 October 2021 13:22
		Re: 2Pi Tower Build By: birkbott on Sat, 30 October 2021 13:41
		Re: 2Pi Tower Build By: Wayne Parham on Sun, 31 October 2021 08:58
		Re: 2Pi Tower Build By: birkbott on Sun, 07 November 2021 09:34
		Re: 2Pi Tower Build By: Wayne Parham on Sun, 07 November 2021 15:18

Previous Topic:	7pi build
Next Topic:	8 Pi Plans Please

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Sun Apr 28 06:17:10 CDT 2024