Home » Sponsored » Pi Speakers » 2Pi Tower Build  () 1 Vote
Re: 2Pi Tower Build [message #94180 is a reply to message #94177] Mon, 09 August 2021 18:36 Go to previous messageGo to previous message
Wayne Parham is currently offline  Wayne Parham
Messages: 18678
Registered: January 2001
Illuminati (33rd Degree)

No need to round the edges of the cutouts. As for the insulation, the section on the braces is horizontal, just like you saw. That's really important. It completely covers the brace, spans side to side and fore to aft. When the insulation is installed on the brace, it looks like it divides and separates the chambers from one another. And in a sense, it does - midrange frequencies cannot pass through it. Bass will pass right through like it isn't even there though. So it forms a very good midrange "trap" and damps the standing waves that would otherwise be present.
 
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Previous Topic: 7pi build
Next Topic: 8 Pi Plans Please
Goto Forum:
  


Current Time: Sat Apr 27 16:29:06 CDT 2024

Sponsoring Organizations

DIY Audio Projects
DIY Audio Projects
OddWatt Audio
OddWatt Audio
Pi Speakers
Pi Speakers
Prosound Shootout
Prosound Shootout
Smith & Larson Audio
Smith & Larson Audio
Tubes For Amps
TubesForAmps.com

Lone Star Audiofest