Home » Sponsored » Pi Speakers » four Pi and subs
Re: four Pi and subs [message #93770 is a reply to message #93769] Sat, 15 May 2021 10:16 Go to previous messageGo to previous message
Jetpump is currently offline  Jetpump
Messages: 6
Registered: July 2020
Esquire

Wayne Parham wrote on Tue, 19 May 2020 15:59
The woofer and tweeter are direct replacements, and they can be exchanged through the front of the baffle. The cabinet stays the same.

There are some crossover changes required, but they are inexpensive and pretty easy to do. Some resistor values are different for the DE250 because it has slightly higher voltage sensitivity than the PSD2002. You can see the components used for each option in the "Notes" section of the crossover document.

Here are some of my thoughts about the upgrades available:

For different compression drivers, is it only resistor swaps? I guess I'm wondering if the horn dictates the frequency response vs. the driver for crossover design.

Thanks,
Billy
 
Read Message
Read Message
Read Message
Previous Topic: 1pi port and insulation
Next Topic: Amp Camp Amp
Goto Forum:
  


Current Time: Thu Mar 28 16:16:04 CDT 2024

Sponsoring Organizations

DIY Audio Projects
DIY Audio Projects
OddWatt Audio
OddWatt Audio
Pi Speakers
Pi Speakers
Prosound Shootout
Prosound Shootout
Smith & Larson Audio
Smith & Larson Audio
Tubes For Amps
TubesForAmps.com

Lone Star Audiofest