AudioRoundTable.com: Pi Speakers » 4pi flat pack, Rhino Line

Home » Sponsored » Pi Speakers » 4pi flat pack, Rhino Line

Show: Today's Messages :: Navigator :: Polls
E-mail to friend

Re: 4pi flat pack, Rhino Line [message #92292 is a reply to message #92257]

Wed, 09 September 2020 13:53

jtwrace
Messages: 66
Registered: October 2009
Location: FL

Viscount

So the little teeth on the Tee Nut are obviously meant to penetrate the substrate - MDF in this case. If you hammer them in, the teeth get bent and mangled and usually cause more harm than good and also put the Tee Nut in crooked which can lead to cross-threaded bolts. That is a nightmare!

So using those grade 5 bolts and washers you "draw" the Tee Nut up into the substrate. DO NOT tighten too tight, just enough to squeeze the extra PL out and hold it. Remember: The PL is really what is holding the Tee Nut, not those goofy teeth. I personally like to leave the bolts in for 48 hrs to make absolute certain the PL has fully cured.

/forum/index.php?t=getfile&id=2626&private=0

/forum/index.php?t=getfile&id=2626&private=0

Attachment: t nut bolt 24 hrs.JPG
(Size: 3.42MB, Downloaded 540 times)

Report message to a moderator

[Message index]

		4pi flat pack, Rhino Line By: rage889 on Sun, 06 September 2020 13:59
		Re: 4pi flat pack, Rhino Line By: compaddict on Sun, 06 September 2020 14:06
		Re: 4pi flat pack, Rhino Line By: Wayne Parham on Mon, 07 September 2020 12:31
		Re: 4pi flat pack, Rhino Line By: jtwrace on Wed, 09 September 2020 13:43
		Re: 4pi flat pack, Rhino Line By: jtwrace on Wed, 09 September 2020 13:47
		Re: 4pi flat pack, Rhino Line By: jtwrace on Wed, 09 September 2020 13:48
		Re: 4pi flat pack, Rhino Line By: jtwrace on Wed, 09 September 2020 13:49
		Re: 4pi flat pack, Rhino Line By: jtwrace on Wed, 09 September 2020 13:49
		Re: 4pi flat pack, Rhino Line By: jtwrace on Wed, 09 September 2020 13:50
		Re: 4pi flat pack, Rhino Line By: jtwrace on Wed, 09 September 2020 13:51
		Re: 4pi flat pack, Rhino Line By: jtwrace on Wed, 09 September 2020 13:52
		Re: 4pi flat pack, Rhino Line By: jtwrace on Wed, 09 September 2020 13:53
		Re: 4pi flat pack, Rhino Line By: tubino on Tue, 15 September 2020 16:05
		Re: 4pi flat pack, Rhino Line By: jtwrace on Tue, 15 September 2020 16:14
		Re: 4pi flat pack, Rhino Line By: jtwrace on Wed, 09 September 2020 13:53
		Re: 4pi flat pack, Rhino Line By: jtwrace on Wed, 09 September 2020 13:54
		Re: 4pi flat pack, Rhino Line By: jtwrace on Wed, 09 September 2020 13:55
		Re: 4pi flat pack, Rhino Line By: jtwrace on Wed, 09 September 2020 13:55
		Re: 4pi flat pack, Rhino Line By: jtwrace on Wed, 09 September 2020 13:57
		Re: 4pi flat pack, Rhino Line By: jtwrace on Wed, 09 September 2020 13:58
		Re: 4pi flat pack, Rhino Line By: Wayne Parham on Wed, 09 September 2020 14:09
		Re: 4pi flat pack, Rhino Line By: jtwrace on Wed, 09 September 2020 14:15
		Re: 4pi flat pack, Rhino Line By: Wayne Parham on Wed, 09 September 2020 17:22
		Re: 4pi flat pack, Rhino Line By: jtwrace on Wed, 09 September 2020 17:38
		Re: 4pi flat pack, Rhino Line By: rage889 on Wed, 09 September 2020 21:27
		Re: 4pi flat pack, Rhino Line By: jtwrace on Wed, 09 September 2020 21:30
		Re: 4pi flat pack, Rhino Line By: compaddict on Wed, 09 September 2020 14:15
		Re: 4pi flat pack, Rhino Line By: rage889 on Tue, 15 September 2020 16:59
		Re: 4pi flat pack, Rhino Line By: Wayne Parham on Tue, 15 September 2020 22:32
		Re: 4pi flat pack, Rhino Line By: Barryso on Wed, 16 September 2020 06:52

Previous Topic:	Pi 8 plans
Next Topic:	H290C Horn/Waveguide

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Fri Apr 26 15:35:57 CDT 2024