Home » Sponsored » Pi Speakers » MiniDSP (Active Line Level Crossover)
MiniDSP [message #91225] Wed, 27 November 2019 14:15 Go to previous message
leonski is currently offline  leonski
Messages: 3
Registered: November 2019
Esquire
I'm curious about others success or problems using MiniDSP crossovers. I am Particularly Interested in the use

of FIR filters. I was reading around here....and can't FIND it again, that steep slope analogue filters induce lots of phase

shift. This is a known issue with all filters which 'precess' at 90degrees per 'order'.

FIR filters have NO phase shift thru the passband. But they do require a bit of computing power, which is part of even the

MiniDSP 2x4HD. The HD part is important. Software also includes several parametric adjustments per INPUT and

OUTPUT. Shelving is possible and room modes can be 'dialed in'.

If anyone has gone this route, I'd sure be curious as to results and difficulty. I'd personally start with the points and slopes

of the 'stock' crossover and go from there. But the FIR filter would be nearly a whole new ball-game.
 
Read Message
Read Message
Previous Topic: Just finished 4pi build need some tips
Next Topic: 4PI cabinet drawing
Goto Forum:
  


Current Time: Wed Oct 21 16:26:08 CDT 2020

Sponsoring Organizations

DIY Audio Projects
DIY Audio Projects
OddWatt Audio
OddWatt Audio
Pi Speakers
Pi Speakers
Prosound Shootout
Prosound Shootout
Smith & Larson Audio
Smith & Larson Audio
Tubes For Amps
TubesForAmps.com

Lone Star Audiofest