Home » Sponsored » Pi Speakers » Low Pass
Re: Low Pass [message #91168 is a reply to message #91167] Thu, 14 November 2019 17:39 Go to previous messageGo to previous message
Wayne Parham is currently offline  Wayne Parham
Messages: 18676
Registered: January 2001
Illuminati (33rd Degree)

The 100Hz at 12dB/octave (2nd-order) slope recommendation is specifically for flanking subs, which are a type of multisub arrangement. Distributed multisubs are usually run lower and with a quicker slope, often 60Hz at 4th-order or 80Hz 4th-order. The best setups run both, with flanking subs up front by the mains and distributed multisubs at the other end of the room.
 
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Previous Topic: 2 Pi Speaker Plans
Next Topic: Corner horns & flanking subs?
Goto Forum:
  


Current Time: Fri Apr 19 14:29:34 CDT 2024

Sponsoring Organizations

DIY Audio Projects
DIY Audio Projects
OddWatt Audio
OddWatt Audio
Pi Speakers
Pi Speakers
Prosound Shootout
Prosound Shootout
Smith & Larson Audio
Smith & Larson Audio
Tubes For Amps
TubesForAmps.com

Lone Star Audiofest