Home » Sponsored » Pi Speakers » Just finished 4pi build need some tips
Re: Just finished 4pi build need some tips [message #90756 is a reply to message #90755] Fri, 09 August 2019 09:26 Go to previous messageGo to previous message
Wayne Parham is currently offline  Wayne Parham
Messages: 18669
Registered: January 2001
Illuminati (33rd Degree)

The Zobel resistor connects on the crossover in position R3. There are two lugs nearest the corner, furthest away from the bank of R1/R2 resistors. Polarity isn't important. You can find the location of R3 on the board layout in the plans. I'll resend the plans if you've lost them.
 
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Previous Topic: 8 Pi Plans
Next Topic: MiniDSP
Goto Forum:
  


Current Time: Thu Mar 28 05:41:12 CDT 2024

Sponsoring Organizations

DIY Audio Projects
DIY Audio Projects
OddWatt Audio
OddWatt Audio
Pi Speakers
Pi Speakers
Prosound Shootout
Prosound Shootout
Smith & Larson Audio
Smith & Larson Audio
Tubes For Amps
TubesForAmps.com

Lone Star Audiofest