AudioRoundTable.com: Source » Mass and tonearm geometry/Empire

Home » Audio » Source » Mass and tonearm geometry/Empire

Show: Today's Messages :: Navigator :: Polls
E-mail to friend

Mass and tonearm geometry/Empire [message #12213]

Sun, 05 June 2005 11:20

Manualblock
Messages: 4973
Registered: May 2009

Illuminati (13th Degree)

Say Wayne; I remmembered your post concerning the mass of the tonearm and any effects it has on tracking the groove. The compliance of the stylus is only part of the story; no? Does the spring action of the stylus decouple the arm from the stylus/arm/groove system?
Lateral force is exerted by the groove rotating against the stylus that must move this mass of the arm; is that correct?

Report message to a moderator

[Message index]

		Mass and tonearm geometry/Empire By: Manualblock on Sun, 05 June 2005 11:20
		Re: Mass and tonearm geometry/Empire By: Wayne Parham on Sun, 05 June 2005 22:01
		Re: Mass and tonearm geometry/Empire By: Manualblock on Mon, 06 June 2005 06:44
		Re: Mass and tonearm geometry/Empire By: Wayne Parham on Mon, 06 June 2005 14:31
		Re: Mass and tonearm geometry/Empire By: Manualblock on Mon, 06 June 2005 15:19

Previous Topic:	BSR 710: repair or replace?
Next Topic:	y´all gotta check this guy out!!!

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Sat Aug 17 11:20:54 CDT 2024