AudioRoundTable.com: Pi Speakers » Four Pi Waveguide Placement

Home » Sponsored » Pi Speakers » Four Pi Waveguide Placement

Show: Today's Messages :: Navigator :: Polls
E-mail to friend

Four Pi Waveguide Placement [message #81112]

Fri, 13 February 2015 17:53

timhowell01
Messages: 11
Registered: May 2014

Chancellor

I'm just about to make the cutouts on my Four Pi baffles for the waveguides and ports. However, the dimensions in the Four Pi plans don't quite seem to match the dimensions of the actual waveguide. From the plans it looks like the edge of the waveguide should be 1.75 inch from the side of the box, and that the waveguide is 10.5 inches wide, but my waveguide is actually 11 5/8 inches wide. From some quick math it looks like the center of the waveguide is supposed to be 7 inches from the side, which makes the edge of the waveguide 1.1875 inch from the edge of the cabinet.

Am I missing something here?

Thanks in advance, Smile

--TWH

Report message to a moderator

[Message index]

		Four Pi Waveguide Placement By: timhowell01 on Fri, 13 February 2015 17:53
		Re: Four Pi Waveguide Placement By: Wayne Parham on Sun, 15 February 2015 11:36

Previous Topic:	Ordered new waveguide H290C
Next Topic:	Measurement Microphones

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Wed Dec 11 17:44:46 CST 2024