AudioRoundTable.com: Pi Speakers » Tim's 4Pi Speaker Build

Home » Sponsored » Pi Speakers » Tim's 4Pi Speaker Build (Description of My 4Pi speaker build)

Show: Today's Messages :: Navigator :: Polls
E-mail to friend

Re: Tim's 4Pi Speaker Build [message #80972 is a reply to message #80971]

Sun, 04 January 2015 01:57

timkur
Messages: 13
Registered: November 2012

Chancellor

Cross Bracing

I see that a lot of folks built their 4pis and attached the back as the last piece. I thought about that, but then I couldn't figure out how to get the cross bracing installed, so I decided to leave the top for the last piece to glue on.

I had some leftover 1x2 maple from a cabinet I installed, and decided to use that. The plans say to install the cross braces with a "slight amount of preload". I took that to mean that they should fit really tight, so I cut the braces 1/16"-1/32" too long, and really wedged them in there. They weren't going to move easily, but I glued them in to be safe.

Thanks!

Tim

Attachment: FrontCrossBrace.jpg
(Size: 98.21KB, Downloaded 8308 times)
Attachment: TopCrossBrace.jpg
(Size: 92.25KB, Downloaded 8279 times)

Report message to a moderator

[Message index]

		Tim's 4Pi Speaker Build By: timkur on Sun, 04 January 2015 01:42
		Re: Tim's 4Pi Speaker Build By: timkur on Sun, 04 January 2015 01:48
		Re: Tim's 4Pi Speaker Build By: timkur on Sun, 04 January 2015 01:54
		Re: Tim's 4Pi Speaker Build By: timkur on Sun, 04 January 2015 01:57
		Re: Tim's 4Pi Speaker Build By: Wayne Parham on Sun, 04 January 2015 09:16
		Re: Tim's 4Pi Speaker Build By: timkur on Wed, 14 January 2015 23:20
		Re: Tim's 4Pi Speaker Build By: timkur on Wed, 14 January 2015 23:39
		Re: Tim's 4Pi Speaker Build By: timkur on Thu, 15 January 2015 00:06
		Re: Tim's 4Pi Speaker Build By: Wayne Parham on Thu, 15 January 2015 10:39
		Re: Tim's 4Pi Speaker Build By: timkur on Sun, 25 January 2015 18:55
		Re: Tim's 4Pi Speaker Build By: timkur on Sun, 25 January 2015 19:16
		Re: Tim's 4Pi Speaker Build By: timkur on Sun, 25 January 2015 19:32
		Re: Tim's 4Pi Speaker Build By: Wayne Parham on Sun, 25 January 2015 21:50
		Re: Tim's 4Pi Speaker Build By: timkur on Mon, 26 January 2015 00:29
		Re: Tim's 4Pi Speaker Build By: Wayne Parham on Mon, 26 January 2015 16:05
		Re: Tim's 4Pi Speaker Build By: timkur on Tue, 27 January 2015 01:04
		Re: Tim's 4Pi Speaker Build By: Wayne Parham on Tue, 27 January 2015 10:43

Previous Topic:	Speaker placement and wavefront launch, revisited
Next Topic:	Ordered new waveguide H290C

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Sat May 11 23:50:53 CDT 2024