AudioRoundTable.com: Pi Speakers » 4Pi crossover with 2226H and D220Ti+QSC PL-000446GP?

Home » Sponsored » Pi Speakers » 4Pi crossover with 2226H and D220Ti+QSC PL-000446GP?

Show: Today's Messages :: Navigator :: Polls
E-mail to friend

4Pi crossover with 2226H and D220Ti+QSC PL-000446GP? [message #80880]

Thu, 04 December 2014 17:56

dubwoofer
Messages: 4
Registered: December 2014

Esquire

Hello,

I hope this is the right subforum...I'm planning a center channel speaker build to go in between some Altec A7's, using a 2226H and a D220Ti/QSC waveguide and was wondering if the 4Pi crossover would be suitable in this application. The current plan is to use a 3 cu ft enclosure with a 2"Hx17"Wx13"D slot vent for an Fb of about 42Hz.

Report message to a moderator

[Message index]

		4Pi crossover with 2226H and D220Ti+QSC PL-000446GP? By: dubwoofer on Thu, 04 December 2014 17:56
		Re: 4Pi crossover with 2226H and D220Ti+QSC PL-000446GP? By: Wayne Parham on Fri, 05 December 2014 14:29
		Re: 4Pi crossover with 2226H and D220Ti+QSC PL-000446GP? By: dubwoofer on Sat, 06 December 2014 03:07
		Re: 4Pi crossover with 2226H and D220Ti+QSC PL-000446GP? By: Wayne Parham on Sat, 06 December 2014 08:28
		Re: 4Pi crossover with 2226H and D220Ti+QSC PL-000446GP? By: dubwoofer on Sat, 06 December 2014 15:00
		Re: 4Pi crossover with 2226H and D220Ti+QSC PL-000446GP? By: Wayne Parham on Sat, 06 December 2014 17:07

Previous Topic:	Guidance when looking for used 2226Hs?
Next Topic:	Melissa Parham

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Mon May 06 00:31:57 CDT 2024