Home » Sponsored » Pi Speakers » 3 PI build (Building a pair of 3 Pi speakers)
Re: 3 PI build [message #79195 is a reply to message #78971] Fri, 31 January 2014 17:16 Go to previous messageGo to previous message
BFP is currently offline  BFP
Messages: 48
Registered: May 2009
Baron
Back panels glued on. I used a couple of screws in the centre at the Baltic Birch window braces to make sure the back was pulled in tight.

index.php?t=getfile&id=1395&private=0

Next I added some temporary feet so i could move the boxes around easier for painting etc.
index.php?t=getfile&id=1396&private=0

I installed the 4 magnet washers into the front panel just below the surface. Sorry for the blurry photo. The magnets will be in the grills. I got these at Lee valley. They have sets of 4 magnets, cups and washers in various sizes. These are 1/2". The weight of the grill will be sitting on a plinth attached to the lower front of the speaker so the magnets only need to hold the grill in against the baffle.

index.php?t=getfile&id=1397&private=0

Here is a box with a plinth installed.
index.php?t=getfile&id=1398&private=0



  • Attachment: DSCF9622.jpg
    (Size: 134.33KB, Downloaded 5170 times)
  • Attachment: DSCF9621.jpg
    (Size: 187.31KB, Downloaded 5156 times)
  • Attachment: DSCF9618.jpg
    (Size: 89.93KB, Downloaded 5135 times)
  • Attachment: DSCF9633.jpg
    (Size: 159.65KB, Downloaded 5171 times)
 
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Previous Topic: Hi and a Few Questions
Next Topic: Happy Pi Day
Goto Forum:
  


Current Time: Wed May 15 21:53:10 CDT 2024

Sponsoring Organizations

DIY Audio Projects
DIY Audio Projects
OddWatt Audio
OddWatt Audio
Pi Speakers
Pi Speakers
Prosound Shootout
Prosound Shootout
Smith & Larson Audio
Smith & Larson Audio
Tubes For Amps
TubesForAmps.com

Lone Star Audiofest