Home » Sponsored » Pi Speakers » Hi and a Few Questions (Hi and a few questions)
Re: Hi and a Few Questions [message #76336 is a reply to message #75659] Wed, 17 April 2013 12:31 Go to previous messageGo to previous message
Michaelzh is currently offline  Michaelzh
Messages: 23
Registered: February 2013
Chancellor
Wayne,

You said "You'll also have to reduce the padding, since you have a 16Ω driver. You might be able to remove padding altogether with a 16Ω driver, but I don't think it will need that much reduction."

Would you please explain "reduce the padding"? I assume this has to do with the resistors R4s and R5s in the crossover schematics. I used an online L pad calculator. It suggested to reduce the number of resistors, given their values in the schematics, by half. I would like to be sure this is what you meant by reducing the padding.

Thanks
 
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Previous Topic: How to improve?
Next Topic: 3 PI build
Goto Forum:
  


Current Time: Mon May 13 05:42:44 CDT 2024

Sponsoring Organizations

DIY Audio Projects
DIY Audio Projects
OddWatt Audio
OddWatt Audio
Pi Speakers
Pi Speakers
Prosound Shootout
Prosound Shootout
Smith & Larson Audio
Smith & Larson Audio
Tubes For Amps
TubesForAmps.com

Lone Star Audiofest