AudioRoundTable.com: Pi Speakers » Buffer for my system?

Home » Sponsored » Pi Speakers » Buffer for my system? (Buffer)

Show: Today's Messages :: Navigator :: Polls
E-mail to friend

Re: Buffer for my system? [message #75499 is a reply to message #75498]

Mon, 11 February 2013 14:17

mantha3
Messages: 72
Registered: May 2012
Location: Lino Lakes, MN

Viscount

The subs are quite different. The Morel is twice the subwoofer the Boston Acoustics is. If I ran a R channel to the Morel and then a L channel to the Boston then the L channel would be loosing some bass.

This is why I currently run a R/L output to one sub and a R/L output to another.

Things are sounding pretty good. I was just thinking with a PASS B1 Buffer the super low output inpedance push would be a good thing to help push siganl to all the amps.

I'm a bit new to this.

Report message to a moderator

[Message index]

		Buffer for my system? By: mantha3 on Mon, 11 February 2013 11:10
		Re: Buffer for my system? By: Wayne Parham on Mon, 11 February 2013 13:34
		Re: Buffer for my system? By: mantha3 on Mon, 11 February 2013 14:17
		Re: Buffer for my system? By: Wayne Parham on Mon, 11 February 2013 15:01
		Re: Buffer for my system? By: JCDC on Tue, 12 February 2013 08:39
		Re: Buffer for my system? By: Wayne Parham on Tue, 12 February 2013 10:45
		Re: Buffer for my system? By: Les Winter on Tue, 12 February 2013 18:39

Previous Topic:	6π bass driver question
Next Topic:	Skywave's 3 Pi Build

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Tue May 14 15:34:43 CDT 2024